The Difference and Size Chart of R RX and BX Ring Type Joint RTJ Gasket China Supplier Low Price Quality SS316 L

 PME is the low price quality RTJ ring type joint gasket supplier in China. PME RTJ gasket can serve widely in the well head equipment and high pressure flowline iron.

 

Teh RTJ gasket PME produce are made in SS 316 L with condition new. These flange gasket of R serial are used in the pressure up to 5K Psi. The R and RX can be interchangeable with the oval and octagonal ring gasket.

 

PME R and RX serial ring type joint gasket is produced in oval and octagonal profile with the ring groove size as below.

 

Ring Groove Size R16, R18 for PME Flange Size 1",Pressure Rating 300 Psi, 600 Psi, 900 Psi, 1500 Psi, 2500 Psi

Ring Groove Size R18 for Flange PME Size 1-1/4",Pressure Rating 300 Psi, 600 Psi, 900 Psi, 1500 Psi

Ring Groove Size R20, R23 for PME Flange Size 1-1/2",Pressure Rating 300 Psi, 600 Psi, 900 Psi, 1500 Psi

Ring Groove Size R23, R24, R26 for PME Flange Size 2",Pressure Rating 300 Psi, 600 Psi, 900 Psi, 1500 Psi

Ring Groove Size R31, R32, R35 or PME Flange Size 3",Pressure Rating 300 Psi, 600 Psi, 900 Psi, 1500 Psi

 

Ring Groove Size RX-23, X-24 for PME Flange Size 2-1/16", Pressure Rating 2000 Psi, 3000 Psi, 5000 Psi

Ring Groove Size RX-26, RX-27 for PME Flange Size 2-9/16", Pressure Rating 2000 Psi, 3000 Psi, 5000 Psi

Ring Groove Size RX-31, RX-25 for PME Flange Size 3-1/8", Pressure Rating 2000 Psi, 3000 Psi, 5000 Psi

Ring Groove Size RX-37, RX-39 for PME Flange Size 4-1/16", Pressure Rating 2000 Psi, 3000 Psi, 5000 Psi

 

Ring Groove Size BX-152 for PME API 6A Flange Size 2-1/16", Pressure Rating 10000 Psi, 15000 Psi, 20000 Psi

Ring Groove Size BX-153 for PME API 6A Flange Size 2-9/16", Pressure Rating 10000 Psi, 15000 Psi, 20000 Psi

Ring Groove Size BX-154 for PME API 6A Flange Size 3-1/16", Pressure Rating 10000 Psi, 15000 Psi, 20000 Psi

Ring Groove Size BX-155 for PME API 6A Flange Size 4-1/16", Pressure Rating 10000 Psi, 15000 Psi, 20000 Psi

Suction Hose Crimped Swivel Flange Fixed Flange and Ferrule 6 Inch 8 Inch Class 150 Class 300 for Fuel Service in Stock

PME suction hose crimped swivel flange or fixed flange are crafted from carbon steel or stainless steel.

 

The hose coupling flanges, swivel or fixed, are secured to suction and delivery fuel hoses through ferrules to transfer the fluid safer.

 

PME swivel flange and fixed flange as termination ends with flange tape Class 150 and Class 300 as per working pressure of the fuel hose.

 

The size of swivel flange or fixed one with toothed shank are in 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4", 5", 6", 8" or as customized as per suction rubber hoses application.

 

The hoses assembly with flange connection or fixed connection is delivered with material test report.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Functioning as Gates Black Gold Rotary Drilling Hoses Grade E PME Bumper Hoses ID 4 Inch FIG 1003 Wing x Thread

 PME bumper hoses Grade E are fabricated with multiple layers as reinforcement under the cover. The hose assembly feature resistance to abrasion, corrosion, oil and weather.

 

The serial number and fabricate date are embossed on the nameplate with the hose ends for quality control and tracking.

 

Couplings can be swaged or butt welded and meet NACE MR-01-75 upon H2S Sour Gas Service as client's cholice of Grade E hose fittings.

 

For Bumper Hose 4", the fittings comes with hammer union 4" FIG1002 MxF, 4" FIG1003 MxF, or 5" FIG1002 Male Sub with Nut and Female Sub. Hubs and Flanges are good options for connecting various oilfield equipment.

 

For more purchase demand for API 7K Rotary Drilling Hoses, API 16C Choke Kill Hoses and API 16D BOP Control System Hoses, PME is here for you 24 hours a day, 7 days a week!

 

API 7K Rotary Drilling Hoses Grade E, ID 4" 7500 Psi, 38 Feet LG, Both Ends 4" FIG1002 BW Female Sub, Stainless Steel Armored Spiraled over the Hose Cover

 

API 16C Choke and Kill Hose 3-1/16" x 10000 Psi BX-154 Flanges Ends, With External Stainless Steel Armored Shield Over the Hose Body, C/W Safety Clamps, Lifting Collar and Chain. Hose 3"ID  10000 psi WP, 15000 psi TP

 

API 16D BOP Control System Hoses with Optional External Stainless Steel Armored Shield for Hose Protection. Ends can be NPT Male, or JIC Swivel Female in 3/4", 1-5/16" or 7/8" JIC swivel Female, 1/2" ID, 5000 Psi WP, 7500 Psi TP, 100 FT

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

2 Ways Swivel FIG 206 Male x Female WP 2000 Psi Style 50 Swivel Joint and 3 Ways Style 80 FIG 1502 for 2 Inch

PME offer the different styles swivel joint up to 15000 Psi cold working pressure, style 30 for 1 way, style 50 for 2 ways and style 80 for 3 ways.

 

For swivel joint long radius, the mostly demanded is 2" to 3" by union ends FIG 1502 male sub x female sub.

 

PME also can customized the swivel assembly as well service contractor's application like swivel joint 2" FIG206 MxF, style 50 with working pressure 2000 Psi for Standard Service.

 

PME swivel joints 2" FIG 1502 functioning one way swivel, two ways swivel or three ways also can serve for H2S Sour Gas Service. 

Swivel Joint, 3 Ways, Style 80

2" FIG1502 MxF, WP 15K, STD

Swivel Joint, 1 Way, Style 30

2" FIG1502 MxF, WP 15K, STD

Swivel Joint, 2 Ways, Style 50

2" FIG1502 MxF, WP 15K, STD

Swivel Joint, 3 Ways, Style 80

2" FIG1502 MxF, WP 15K, STD

Swivel Joint, 3 Ways, Style 80

2" FIG1502 MxF, WP 15K, STD

Swivel Joint, 2 Ways, Style 50

2" FIG1502 MxM, WP 15K, STD

Swivel Joint, 3 Ways, Style 80

2" FIG1502 MxM, WP 15K, STD

Swivel Joint, 3 Ways, Style 80

2" FIG1502 MxM, WP 15K, STD

Swivel Joint, 2 Ways, Style 50

2" FIG206 MxF, WP 2K, STD

Low Pressure Chemical Hoses WP 10 Bar with API Flange Ends and Hammer Unions

PME chemical hoses are used for conveying acids and chemicals in high concentration.

 

The chemical hoses are fabricated with hose tube UHMWPE, high tension textile fabric as reinforcement and cover for high wear resistance.

 

PME chemical hoses can be up to Max. Length in 100 meters, with ID from 3/4" to 6". The pressure rated is in 10 bar, also named 145 Psi.

Both ends for PME chemical hoses are wing union male sub and female sub, normally in FIG 206 Butt Welded. Lifting collar and chain x 2 sets are options.

 

API flanges ends i.e. 5" flange class 150 and swaged like 4" ferrule, 4" NPT male hose inserts are available for PME low pressure chemical hoses.

 

For more demand of Low Pressure Hoses, no limited as below, please contact PME Sales Team (Email: contact@pmeindustrial.com) for instant reply.

 

Low Pressure Mud Hose Assembly, ID 4", Working Pressure 170 Psi, Swaged Ends 4" FIG206 Male x Female

Low Pressure Drill Water Assembly, ID 6", Working Pressure 150 Psi, Both Ends 6" API Flanges

Portable Water Hose Assembly, ID 1-1/2", WP 150 Psi, Union Ends 1-1/2" Hammer Union FIG200 MXF

Water Dump Flexible Hoses, 8", 10", WP 150 Psi, Ends in 8" 10" API Flanges

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

FMC Chiksan Flowline and PME Flowback forged Irons 2 Inch FIG1502 P537789 3139477 P506064 P503840

PME Flowback forged iron products are interchangeable with FMC Chiksan Flowline for oilfield industrial. The PME Industrial material serves for standard service and sour gas service.

 

Please send Part Number of FMC, you will receive good offer and quick response from PME sales team!

 

PME low torque plug valve Assembly 2" x 2" FIG 1502 MxF refer to FMC P537789 ULT 150 CWP 15000 Psi, Standard Service and for 1" x 2" ULT 150 valves, please note the PN FMC P516108.

 

PME longsweep swivel joint 2" FIG1502 MxM, WP 15000 Psi, Style 10 refer to FMC 3139477 LS-15 for three race. FMC 3144125 for PME style 30 and Style 80 swivel joint for 2" FIG1502 MxF.

 

PME integral fittings 2" CWP 15000 Psi cover FMC Elbows P506064 2" FIG1502 FxF, Tee P503840 2" FIG 1502 MFF, P503848 2" FIG1502 FMM, P505362 2" FIG1502MMF, P505364 2" FIG 1502 MMM and integral cross P503840 2" FIG1502 MxFxFxF.

 

Integral pup joint PN 3255522 features 2" FIG1502 MxF 4 FT and FMC 3255524 for 6 FT. PME Industrial can produce the integral pup joint with the customized length to meet client's application for standard service and sour gas services.

 

PN 3201570 is for hammer union 2" FIG1502 with CWP 1034 bar (15000 Psi) for 2" threaded. PME hammer unions can be changeable with FMC WECO and Kemper.

 

For the integral adapter size 2" FIG1502 MxF, MxM, FxF, please notify the length required or PME can recommend as your request.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

FIG 206 Hose Hammer Union Coupling to Connect Hose Function as King Combination KC Nipple

PME FIG 206 Male Ends hose coupling is produced to assemble and disassemble hydraulic hoses quickly.

 

The male hoses nipple is commonly applied for the low pressure suction and discharge hoses with variety of fluid medium, like water, chemical, and bulk.

 

The male hose nipple made in China by PME Industrial is the hose coupling for connecting the hoses to pipeline.

 

The FIG 206 Hammer Union Coupling is forged by high quality carbon steel with hose tail. It can easily interchange with the hammer union ends FIG200 and FIG206.

 

PME FIG 206 Hose Coupling Specification

Size: 4"

Cold Working Pressure: 20 bar

Hose Shank on Male / Female End: Yes

Application: Slurry Coupling, Frac Hose Fitting

 

Shanghai PME Industrial Co., Ltd.

Cell / WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com