2024年11月21日星期四

Hydraulic Working Pressure 4000 Psi Hose 3-1-2 Inch Inside Diameter for Drilling Rig Workover Rig

PME high pressure Grade C hydraulic hoses are produced by multiples aprial plies of high tension steel wire material for reinforcement. And the outside cover the hoses are abrasion, oil and weather resistant.

 

With the inside diameter 3-1/2", pressure rated 4000 Psi, the test pressure is 6000 Psi as per API 7K Specification. PME Industrial can produce the hydraulic hoses tested by 8000 Psi as clients require.

 

FIG 1502 Male x Female Hammer Union ends or Male NPT Thread as PME Grade C hydraulic hoses are normally recommended. PME also supply the safety clamps chain and lifting collar at each connection end.

 

PME Grade C Hoses

ID: 2", 2-1/2", 3", 3-1/2", 4", 5"

Working Pressure: 4000 Psi

Ends: Male NPT, Hammer Union

Standard: API 7K Specs







 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

2024年11月20日星期三

PME Well Service 2 Inch FIG1502 Flowline Equipments for High Pressure Well Testing Cementing and Fracking

PME well service serve your drilling equipment needs with plug valves, check valves, choke valves, pup joint, long radius swivel joint, integral fittings and choke kill manifold.

 

The 2" FIG1502 flowlines are used for connection of surface manifold by ends of hammer union 2" FIG1502 Male x Female.

 

Nominal size of well service flowline is 1" to 4" for fracturing, cementing, acidizing and well testing application. The material can be suitable for standard service and H2S sour gas service.

 

PME 2" FIG1502 flowlines typically handle working pressure up to 15000 psi in cold condition, and 10000 Psi with the fluid including sour gas.

 

Integral Pup Joint 2" FIG1502 MxF 10FT

 

Long Sweep Swivel Joint Style 2" FIG1502 MxF Style 30 Style 50

 

Cementing and Circulating Hose Loop 2" FIG1502 MxF, Length 9.5FT 10 FT, Style 10/50







PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Grade E Rotary and Vibrator Hose for Pumping Mud in Drilling Rig with Higher Flow Rates API 7K Certified

Grade E rotary hose features in ID 3", 3-1/2" and 4" with certification API 7K, Max Length 100 FT.

 

The hoses are designed as flexible connections for pumping mud for standpipe and swivel and pump to standpipe for drilling rigs.

 

PME Grade E hoses are produced with multi-layer of high tensile flexible spiral steel wire, which is good to resistant to abrasion, oil and weather.

 

The hoses can works as mud delivery hose, cement hose and de-coking hose. With high quality material, PME hoses are ends coupling with butt weld hammer union, API flanges and male thread or other connections as clients' required.

 

Grade E Rotary Hose

ID: 3", 3-1/2", 4"

Max. WP: 7500 Psi

Max. Length: 100 FT

Ends: Hammer Union, API Flange

Standard: API 7K Specs

 

For the high pressure hoses, such as colfexip hose, jumper hose, kelly hose, vibrator hose, cementing hose, PME hoses are available for the stainless steel armored and fire resistance. 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com












2024年11月19日星期二

What is the difference of Chiksan swivel for style 30 style 40 style 70 and the plug valve pressure rating 15K PSI

 PME Chiksan style swivel feature high pressure and long radius forged by quality alloy steel. The material for NACE MR-01-75 can be suitable for sour gas service.

 

The mostly common demanded style for PME Chiksan swivel are style 10 and style 50, size from 2" to 3", pressure rated 6000 Psi to 15000 Psi.

 

Widely operating for choke kill manifold, cementing, fracturing and acidizing, PME offer other style for oil field various fluids, such as hammer union long sweep swivel Style 70, LS 15K and Style 30, 40.

 

The end connection for PME Chiksan swivel style 30/40/70 can be union MxM, MxF, FxF 602/1002/1502, also can be line pipe thread.

 

PME low torque plug valves are also chosen quality raw material for forging after heat-treatment for longer valve life.

 

PME plug valves come with 2" x 1", 2" x 2" and 3" x 3" with manual or gear operated. If you need high quality plug valve, you can count on PME low torque union ends valve male by female.

 

All plug valves are manufactured as API 6A standard. Call PME team now to learn more about plug valve size, material and connections. PME aims to same time and money by supplying quality Chiksan flowline 2" FIG1502 15000 Psi.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com










2024年11月18日星期一

API 16C Flexible SS Armored Hose Line With API 6A Fixed Flange 3-1-8 Inch R35 SS Ring Groove

 

API 16C Flexible SS Armored Hose Line With API 6A Fixed Flange 3-1-8 Inch R35 SS Ring Groove

 

PME choke and kill hose lines are approved by API 16C standard. The hose body and flanges ends are suitable for standard service and H2S sour gas service.

 

The API 16C choke kill hoses are rated working pressure 15000 Psi for 2" and 3", and the 4" WP 10000 Psi. Max length can be up to 100 feet.

 

For purchasing information, please specify the ID (Inches), Working Pressure (Psi), Test Pressure (Psi), Coupling (NPT, Hammer Union, or API Flange), and the length required for the API 16C flexible hoses.

 

By conveying the fluid mud from BOP control unit to the kill and choke manifold, PME API 16C hoses are fire resistant hose with stainless steel armored.

 

PME hoses are used widely for well testing on the well control system for the oil, gas, mud and other high pressure oilfield fluid.

 

API 16C Hose ASSY

ID: 3"

Working Pressure: 5000 Psi

Test Pressure: 7500 Psi

Ends: API Flange 3-1/8" 5M R35

SS Armored: Yes

 

Find API Certified hoses, and contact PME teams by today!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com










2024年11月8日星期五

Cementing Circulation Hose Loop 105 MPa Chiksan 2 Inch FIG1502 Swivel Joint Style 50 x 10 FMC

For usage in cold working pressure 105 MPa well service, PME Chiksan style cementing loop can delivery fluid in standard and H2S sour gas.

 

PME heat-treated cementing hose loop are assembled by integral straight pipe 2" Figure 1502 Male x Female and long swivel joint style 10 by style 50.

 

The union ends 2" FIG1502 are easy to connect the cementing hose loop to fracturing pipeline, well testing pipework and pumps. Hammer union ends make PME Chiksan pipeline interchangeable with other brand like FMC, SPM, Kemper and ANSON

 

PME Figure 1502 integral long radius steel hose loop are in size 2" and 3" with length 6 feet, 8 feet, 10 feet and 12 feet to meet any need.

 

All cementing circulation hose loop produced by PME Industrial have COC Documents, Pressure Test Report and Raw material traceability.

 

PME Industrial offers our clients full high pressure Chiksan style equipment for integral, welded and threaded connections.  

 

Call PME today for effective solution for your fluid control application!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com