What diameter is rotary vibrator assembly and how long drilling hose as maximum length

PME Normal ID 2-1/2", 3", 3-1/2" and 4" rotary vibrator hoses come with safety clamps, hose lifting collar and sling.

 

Looking for rotary hose assembly Grade D for oil field services and supplies, please provide the dimension, connection and length.

 

Maximum length would be 100 ft (30 meters). PME Team can produce longer API 7K mud hoses assembly for local drilling contactors' operation.

 

Fittings for PME rotary vibrator assembly are hammer union male sub and nut, female sub, hubs and API flanges.

 

PME focus on quality high pressure rotary hose and mud hose. Each hose assembly is fabricated and inspected as API 7K standard for both standard and sour gas service.

 

Full set of mill of certificates only can be issued upon deeply inspection, including, not limited to, hydrostatic test for test pressure, compliance certificate and hose coupling material certificate.

 

For technical requirement rotary hoses PME-ASSY-3-1-2IN-WP5K-API7K, kindly contact email PME team by email contact@pmeindustrial.com or WhatsApp +86 138 1899 0736 for quick answer.

 

Rotary Hose / Mud Hose, 3-1/2", WP 5000 Psi, TP 7500 Psi, Butt Welded Union Ends 4" FIG1002 Male x Female, Long 60 Feet as per photo below, with delivery fluid water based or oil based sully, stainless steel armor is available. Package good by sea freight is iron box or plywood box.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

PME Rotary Hoses 3.5 Inch Grade D Pressure Rated 5000 Psi Ends 4 Inch FIG 1502 with Safety Chain Clamps

PME 3-1/2" API Grade D Rotary Vibrator Hoses are pressure rated in WP 5000 Psi, TP 7500 Psi with or without Stainless Steel Armored.

 

The 3-1/2" Grade D hoses serve for oil and gas drilling with 4" FIG 1002 Hammer Union Male Sub with Nut and Female Sub. Safety chain clamps for both ends to secure the hose for more safe operation. API Flanges and NPT Thread can be equipped to connect various oilfield equipment.

 

PME Grade D Rotary Vibrator hoses are also named drilling hoses, cement hoses as they are used for oilfield drilling, cementing, bumping mud. The fluid medium can be water based mud, oil based mud under high pressure application.

For more high pressure drilling hoses certified by API 7K Standard as below technical specification, contact PME sales team today!

 

Email: contact@pmeindustrial.com, Cell/WhatsApp: +86 138 1899 0736

 

Rotary hoses 4" Grade E WP 7500Psi China Supplier PME Industrial provide high pressure drilling hoses for years

4" ID, 75 Ft., 5000 psi, C/W Fig 1002 Union, PME Industrial Rotary Drilling Hose

5", 7.5K China mud rotary hose x 23.27 mtr c/w 6" fig 1002 female sub one end and PME Industrial 6"1002 male sub/nut other end

6" ID X 10 feet PME rotary hose for h2s application wp: 2000 psi , crimped with 6" hammer union male and female sub

Mud Vibratory Hose, 4" ID, WP: 7500psi ends 5" Fig 1002 MxF, Length: 10ft, Supplied by Shanghai PME Industrial with Safety Clamp API 7K

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

High Pressure Oil Base Mud Hoses API 7K Grade E 3-1-2 Inch 4 Inch Hammer Union FIG 1002 Safety Clamps

API 7K Grade E specify the rotary drilling and vibration hoses, mud delivery hoses and cement hoses as high pressure oilfield hoses during oil and gas drilling and exploration application.

 

The Grade E high pressure hoses works as flexible rubber connections of standpipe on the drilling rig and top drive or pump for pumping the mud.

 

PME Grade E oil base mud hoses are fabricated in Inside Diameter (ID) 3" (76 mm), 3-1/2" (89 mm), 4" (102 mm) and 5" (127 mm) at working pressure 7500 Psi, that is 517 bar.

 

Flexible Cementing Hose , Application: Cementing & Acidizing , ID: 2” , Length:15 ft , Working Pressure: 15000 psi , Test Press: 22500psi ,  Operating Temperature: -25~100°c , Wing: 2” Weco F×M Hammer Union FIG 1502 , standard : API SPEC 16C , lining : resist abrasion , corrosion , oil &  H2S , cover: fire resistant & stainless steel armored , handling device :  safety clamp &lifting collar & both ends

Vibrator Hose Assy 3-1/2 in x 20ft : Rating 5000psi, Size 3-1/2 in x 20ft, Vibrator Assy Vibrator Hose Assy 3.1/2” ID X 20ft Length : WP: 5000psi, TP : 10.000 Psi C/W: 1 Set Union Coupling 4” X 6000 Psi, Fig-602 & Safety Clamp And Hydrostatic Test Certificate

Flexible Metal Hose Material Stainless Steel, Rating 5000 psi, Connection Coupling API 7 K Flexible Hose With Hammer Union FIGURE 602, 5m length , 4" working pressure 4000 psi . 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

 

What is the difference of Grade A, Grade B, Grade C, Grade D, Grade E and Grade F API 7K High Pressure Hoses

 

The high pressure hoses show PME Grade E Rotary Vibrator Hoses with integral hammer lug unions at both ends, male sub and wing nut at one ends and female sub at the other end. The over length of hose assembly is 50 feet.

 

According to API Spec 7K Drilling and Well Servicing Equipment, high pressure hoses assembly are identified by grades as the table 10.

 

Grade A, Grade B, Grade C, Grade D, Grade E and Grade F are classified by rated working pressure. It's also identical to the design pressure of PME high pressure drilling hoses.

 

API 7K Grade A PME Rotary Drilling Hoses rated working pressure 1500 Psi, test pressure 2250 psi, sized in 2", 2-1/2"

API 7K Grade B PME Vibrator Hoses rated working pressure 2000 Psi, test Pressure 3000 Psi, size in 2", 2-1/2"

API 7K Grade C PME Cement Hoses rated working pressure 4000 Psi, test Pressure 6000 Psi, size in 2", 3", 4" and 5"

API 7K Grade D PME Mud Delivery Hoses rated working pressure 5000 Psi, test Pressure 7500 Psi, size in 2" to 6"

API 7K Grade E PME High Pressure Drilling Hoses rated working pressure 10000 Psi, test Pressure 15000 Psi, size in 2-1/2" to 6"

API 7K Grade PME High Pressure Drilling Hoses rated working pressure 15000 Psi, test Pressure 22500 Psi with or without 2 sets of safety clamps which are not used as hoisting devices

 

Hydrostatic pressure test is performed on PME high pressure hoses assembly at the working pressure, which is 1.5 time of the working pressure. The test medium for hydrostatic pressure test is water.  

 

Email: contact@pmeindustrial.com or WhatsApp: +86-13808990736 for price quote of the high pressure drilling hoses, choke and kill hoses line, blowout preventer hoses and flowline flowback Chiksan Style Irons! 

Good Day to Ship Rotary Bumper Hose Orders To PME Industrial High Pressure Hoses Buyers Grade E API 7K

Labor Day Holiday is approaching, and PME team move quickly to ship HI Pressure rotary hoses and bumper hoses to customers. The hoses sized in 4 inch, Grade E, length in 15ft, 75ft and 23 meters are well assembled, tested as API 7K Standard and and packed good for shipping by ocean.

 

For more information, hit PME up for high pressure hoses need blow listed.

 

Hose, Cementing, 10K, 2" ID X 50 Feet Long,, With 2 Inch Fig 1502 Hammer Union Male /Female On Ends. Working Pressure: 10,000 Psi Test Pressure: 15,000 Psi  

 

Rotary Drilling Hoses, API Spec 7K Grade D, WP 5000 psi, I.D. 3”, length 30’, with couplings male 3” NPT threads both ends

 

Vibrator Hose Assy 3-1/2" Id X 30 Ft, 40 Ft, 80 Ft Long, 5000 Psi W.P., Class-D,7500 Psi Test Pressure, W/ 4" Weco Union Fig 1002 On Each End (Male & Female)

 

15Ft Drilling Hose. 4" ID, Max Working Pressure 10K PSI, Grade F, Tested at 15K PSI, API SPEC-7K, UNIONS 4" FIG-1003, 10K PSI , Both Ends Male, With safety clamp, chain and lifting eyes , Length: 84 ft,

 

Drilling Mud Hose 5", WP 7500 PSI, TP 11250 PSI, Temp. Range II, Grade E, Length 20 MT (65.61 ft), Hammer Union Male and Female Fig 1002

 

API 7K Bumper hose ID-6" x FIG 1002 M/F Hammer union , L-15 ft, WP.5000PSI, TP.7500 PSI, Safety Clamp , Chain And Lifting Eyes

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Hydrostatic Test Video for High Pressure Hoses 2 Inch WP 7500 Psi TP 11250 Psi Pressure Chart

 

All PME Industrial high pressure hoses assembly for drilling are passed hydrostatic test as per API 7K, API 16C, API 16D specs.

 

As per API standards, working pressure should be 1.5 times of test pressure. PME hoses are assembled by crimping hose body with hammer unions or API flanges. The next procedure is hydrostatic test for hoses pressure test.

 

Only the hoses assemblies which passed the hydrostatic test are qualified and approved for delivery to drilling site users and oil and gas sector contractors. PME API certified hoses assembly come with hydrostatic test certificates.

 

This video shows that how PME Industrial proceed the hydrostatic test on high pressure hoses API 7K Grade E. The basic technical data of hoses is as below.

 

High Pressure Hoses

ID: 2"

Working Pressure: 7500 Psi

Test Pressure: 11250 Psi

Ends: 2" FIG1502 Wing x Thread

Length: 15FT, 20FT, 30FT, 50FT

 

For more infos about pressure rating 7500 Psi High Pressure Hoses, API 7K Standard, email PME today!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

PME API 7K 1 Inch WP 10000 Psi Hoses WECO 1502 Male Female 30 Meter

 

High pressure hoses featuring in working pressure 10K Psi are normally required as 2" to 5".

 

The smaller size like 1", 1-1/2" also can be produced by PME Industrial for WP 145MPa for special application.

 

For best price and lead time for the below items, you're welcomed to reach PME Sale Team.

 

Manifold Hoses 3" WP 5000 Psi, C/W Ends 4" FIG 1502 MxF, are resistant to oil-based drilling mud.

Manifold Hoses 76mm WP 35 MPa, C/W Flanges 3-1/8" x 5000 Psi, are resistant to oil-based drilling mud.

Manifold Hoses 4" WP 10000 Psi, C/W Ends 4" FIG1502 MxF, are resistant to oil-based drilling mud.

Drilling Hoes 102mm WP70 MPa, C/W Ends 4" BSPT Threaded, are produced as API 7K-2015.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

How to choose the right high pressure hoses China supplier who make jumper hoses in 4 Inch Grade E API 7K Certs

 PME specializes in oilfield high pressure hoses assembly. Our team has extensive experience in the API 7K hose industry.

 

In order to make right choice of kelly hoses and jumper hoses for drilling operation, PME Industrial produce and supply a range of hoses assembly with rated pressure up to 15000 Psi.

 

PME kelly hoses and jumper hoses assembly is comprised of several layer of spiral wire reinforcement. All WP 7500 Psi Hose are in Grade D, delivered with pressure test report, COC and COO for commercial support.

 

4" Kelly hoses and jumper hoses normally equipped with hammer union 4" FIG1002 or FIG1003. API Flanges are also a good option as clients' in-site need.

 

Kelly Hose, Jumper Hose

Size: 4"

Working Pressure: 7500 Psi (Grade E)

Ends: 4" FIG1003 Thread Tr180x8

Length: 15 FT, 75FT

C/W Safety Clamps

 

Send us a direct email if you would like to place an order, or any interests of API 7K Grade E Kelly and Jumper Hoses.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

API 7K 2 Inch WP 10000 Psi Hoses and Chiksan Style Flowlines Shipped to the Top Clients in Southeast Asia

 PME Industrial packed and delivered the high pressure hoses and some Chiksan flowlines to one of PME's top clients in Southeat Asia.

 

Kindly reach PME Sale Team by E-mail to contact@pmeindustrial.com, or Whatsapp +86-13818990736 if you have any request as below list.

 

PME High Pressure Hoses, API 7K Certified

 

Drilling Mud Hose ID: 4", WP: 5000 PSI, TP 10000 PSI, Length: 84 ft, Flexibility: FLS1, Temp. Range: II (-20 to 100 C) Grade D

 

Drilling Mud Hose 5", WP 7500 PSI, TP 15000 PSI, Temp. Range II, Grade D, Length 20 Meter, Hammer Union Male and Female Fig 1002

 

Mud Hose 2", Working Pressure: 5,000 PSI, T.P: 10000 PSI, Grade D, Length: 10 Mtr, with Fitting Hammer Union 1502 Male x Female, Armoured Type

 

Drilling Mud Hose 5", W.P: 5000 PSI, T.P: 10000 PSI, According to API 7K, Last Edition, Grade D, L: 7.5 Mtr, FSL2, 5" Fig 1002 Male x Female (Hammer Union) End Connection

 

PME Chiksan Style Pipelines

 

90 Deg Elbow M XF, 3" inch Fig 602, Hammer Union, Working pressure 2000psi, Sour service (NACE MR0175)

 

Tee, FxFxM,3 inch Fig 602, Hammer Union, Working pressure 2000psi, Sour service (NACE MR0175)

 

TUBO WECO Hammer Union FIG 1502, 4" X 10 FT WP.10000PSI.

 

Crossover adapters with 3" Weco 1502 Male / Female on one end and 3" 600# Flange on the other

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Need 15000 Psi 10000 Psi Working Pressure Cement Hoses Certified by API 7K?

With the confirmation of hose end connections male and female in FIG 1502, PME 2" cement hoses are manufactured as per API 7K Specs.

 

Besides of the connection 2" FIG 1502 MxF, PME Industrial also need some basic technical parameter like working pressure and length to start the cement hoses fabrication.

 

PME cement hoses CWP 10K and CWP 15K come with the certification like COO, COC, Pressure test reports for all hoses, Mill Test Report for metal part and rubber part, and NDT report. All these certificates from PME Industrial are free of charge.

 

Cement Hose

ID: 2"

WP 10000 Psi, TP 15000 Psi

WP 15000 Psi, TP 22500 PSI

Ends: 2" FIG 1502 MxF

Length: 40 Feet

C/W Safety Clamps

 

For good quote of high pressure cement hoses in CWP 10000 Psi, CWP 15000 Psi, contact PME today!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

 

High Pressure Hoses ID 2 Inch Butt Welded Union Ends Grade F

PME Grade F Hoses 2" WP 15 K Specifications:

 

Size: 2"

Length: 50 ft

Working Pressure: 10000 psi

Test pressure: 15000 psi

Temperature Range: -20°c to +100°c
Flexible Specification Level: FSL-1

Tube: Oil Resistance for Petorleum Drilling Fluid

 

PME Grade F 2" high pressure hose are manufactured, tested, marked and monogrammed as per API SPEC 7K (LATEST EDITION). Hoses are with hammer union male by female ends for directional drilling systems.

 

High pressure hoses also function as rotary mud hose, which can be supplied with safety clamps, lifting collar double eyes, safety chain with shackles each ends 8 ft.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Vibrator Hoses ID 3-1-2 Inch Butt Welded Union Ends 5 Inch FIG 1002 M F Grade D

PME Vibrator Hose 3.5" Grade D

 

Technical Specification

Size: 3.1/2"

Length: 10 ft, 16 ft, 60 ft

Working Pressure: 5000 psi

Test pressure: 7500 psi

Temperature Range: -20°c to +100°c
Flexible Specification Level: FSL-1

Tube: Oil Resistance for Petorleum Drilling Fluid

 

PME Grade D 3.5" vibrator hose are manufactured, tested, marked and monogrammed as per API SPEC 7K (LATEST EDITION). The hoses workingng pressure 5000 psi can be complete with safety clamps as clients require. And hose connection are 2 nos of butt weld union 5" FIG 1002 male and female

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Hose Vibrator Grade D 3.5 Inch Hammer Union 4 Inch FIG 1002 Male Female

Grade D stands for working pressure 5000 Psi of hose vibrator. Test pressure of hose is 1.5 times as API 7K Specification.

 

Scope from Grade A to Grade G, WP 1500 psi, 2000 psi, 4000 psi, 5000 psi, 10000 psi and up to 15000 psi, PME high pressure drilling hoses are suitable to widely application of oilfield equipments.

 

PME hose vibrators can transfer water base mud, oil base mud and H2S, with working temperature -20 to 121 C.

 

Pictures are for PME new made Grade D hoses, inside diameter 3", WP 5K C/W union ends 4" FIG 1002 MxF. Max. Length is 100 FT and we produce the specific long hoses as clients' requirement.

 

Any interest of technical specification and price of hose vibratory hoses, contact PME sales team for quick response.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com