Hydrostatic Test Video for High Pressure Hoses 2 Inch WP 7500 Psi TP 11250 Psi Pressure Chart

 

All PME Industrial high pressure hoses assembly for drilling are passed hydrostatic test as per API 7K, API 16C, API 16D specs.

 

As per API standards, working pressure should be 1.5 times of test pressure. PME hoses are assembled by crimping hose body with hammer unions or API flanges. The next procedure is hydrostatic test for hoses pressure test.

 

Only the hoses assemblies which passed the hydrostatic test are qualified and approved for delivery to drilling site users and oil and gas sector contractors. PME API certified hoses assembly come with hydrostatic test certificates.

 

This video shows that how PME Industrial proceed the hydrostatic test on high pressure hoses API 7K Grade E. The basic technical data of hoses is as below.

 

High Pressure Hoses

ID: 2"

Working Pressure: 7500 Psi

Test Pressure: 11250 Psi

Ends: 2" FIG1502 Wing x Thread

Length: 15FT, 20FT, 30FT, 50FT

 

For more infos about pressure rating 7500 Psi High Pressure Hoses, API 7K Standard, email PME today!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Chiksan style Swivel Joint Repair Kits for 2 Inch FIG1502 Style 50

 PME long radius swivel joint repair kits are used for replacing the wear parts for the swivel joints 2" FIG 1502 CWP 15000 Psi.

 

The swivel joints functions same as Chiksan swivel style 10, style 20, style 30, style 50, style 60, style 80 and style 100.

 

PME swivel joint repair kits include bearings and seals, which are good to rebuild the swivel joints. The production cost for end users can be highly reduced accordingly.

 

Swivel Joint 2" FIG1502 Style 50

Swivel Joint Repair Kit 2" FIG1502

Working Pressure 15000 Psi

 

PME supply the swivel joint repair kit for standard service and H2S sour gas service Chiksan style joints.

 

For more details for 2" FIG1502 WP 15Kpsi flowline fittings, you're welcomed to contact PME today!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

PME API 7K Grade E Bumper Hose API 16C 3-1-8 Inch 5K Coflex Hose

PME Grade E bumper hose and 3-1/8" 5K Coflex hose are manufactured according to API 7K and API 16C.

 

All high pressure hoses supplied by PME Industrial have unique identification number for traceability.

 

Pressure test certificate with charts, NDT inspection reports and material certificate come with PME bumper hose and colfex hose assembly.

 

The nameplate mark hose assembly size like 4", working pressure 5000 Psi, 7500 Psi, length and end connections hammer union or API Flanges.

 

PME Industrial can supply the safety clamps and slings for both ends of hoses assembly as clients' requirement.

 

Bumper hose Grade E 4" ID, WP 7500 Psi, length 15 FT with hammer union connection, 4" FIG1002 male from one side, and 4" FIG1002 Female from the other sides. The bumper hoses are manufactured as API 7K standard.

 

Coflex Hose with nominal bore size 3-1/8", fire resistance, working pressure 5000 Psi with 3-1/8" x 5K Psi with flanged type connection from bother sides, length in 40FT. The colfex hoses are manufactured as API 16C standard.

 

For more high pressure hoses as below, drop PME sales team a message for details.

 

HP Hoses for kill line normial bore 2", fire resistance, working pressure 10000 psi, length 40 ft, c/w API 2-1/16" 10K flanges

 

PME vibrator Hose, nominal bore 2", working pressure 7500 psi, Grade E, length 10m, c/W hammer union 2" FIG1502 Male x Female

 

PME Industrial fire resistance hydraulic hose, certified API 16D, nominal bore 1", working pressure 5000 psi, with 1" NPT male from both ends.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

PME Well Test Hose Loop 2 Inch 15K Psi 9.5FT FIG1502 Style 50 Swivel Joint and Pipe

Chiksan style hose loop configure with integral straight pipe and swivel joint. They are used for well testing pipeline, acid fracturing and cementing slurry piping. The swivel joint can be long sweep and short radius. Style 10 and Style 50 are the usual type for the swivel joint used.

 

As per different working pressure from 6000 psi (42MPa) to 15000 psi (105MPa), hose loop connection can be FIG602, FIG1002, and FIG1502. Full length of well test hose loop are in 8ft, 9.5ft, 10ft and 12ft.

 

Hose Loop / Swivel Joint and Pipe

2" x 9.5 FT, WP 15000 Psi

C/W Swivel Joint 2" FIG1502 Style 50

 

For more hose loop technical requirements, don't hesitate to contact PME Sales Team!

Cementing and Circulating Hose 2" x 12 FT with Swivel Joint Style 10 / 50, 15000 Psi FIG 1502, Standard Service

 

Please email us the size, swivel joint style, working pressure and length, PME will be back with good offer for your project!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

PME Firefighter BOP Hose 1 Inch 1-1-2 Inch 5000 Psi Heavy Duty stainless Steel

PME BOP Firefighter BOP Control Hose General Specification

 

Description: BOP Control Hose

ID: 1", 1-1/2"

Working Pressure: 5000 Psi

Ends: 1" NPT Male, 1-1/2" NPT Male

Length: 50FT, 100FT

Stainless Steel Armored: Yes

API Specs: API 16D Specs

Fire Resistance Certificate: Yes

Hydrostatic Test Report with Graph: Yes

 

For other BOP hydraulic control hoses, don't hesitate to contact PME Sales Team!

 

Armored steel coflex hose 10 meter with 1" FIG1502 male x female

Coflexble hydraulic hose 15 meter 1" seal sealing union ends

BOP control hydraulic hose with stainless steel armored type, API 16D, 1" x 12 FT length, 5000 Psi WP, API Specs 16D

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

PME Flowlines For Cementing, Acidizing, Well Test, Test Line Manifolds and Production Pipe Line

 

PME integral fittings are used for connecting surface manifold with hammer union connections. They are integral elbow and cushion elbow. T shape also is named tee in hammer union ends wing or thread. PME also produce the tees in flanged ends.

Integral Elbow 3" FIG602 WxT

Cushion Elbow 3" FIG1502 WxT

Tee 3" FIG 602 W x F x 3" 600 RF ANSI Flange

 

Hammer union check valves are used as non return valves. Normal size is 3" in Figure 602. Working pressure is 6000 psi. Ends connections are 3" FIG 602 wing and thread. PME Industrial's top entry check valves are optional for well testing operation.

Check Valve 3" FIG602 WxT

 

PME test plugs come with or without NPT thread as clients' requirement. The below photo is for test plug 3" FIG206 Wing with 1/2" NPT. There are 2" FIG1502 blind plug (male) with 1/2" NPT thread and blind plug (female) for choice.

Test Plug 3" FIG206 W x 1/2" NPT

 

The flowlines are easy for transportation and storage. PME flow control fittings feature flexibility, shook resistance, and H2S resistance. The crossover adaptors flange to flange or flange to union ends serve for cementing, acidizing, well test, test line manifolds and production pipe line.

X-over Flange to Union 2-1/16" 3K x 2" FIG 1502 Wing

X-over Flange to Flange 3-1/8 3K x 3-1/16 10K

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com