Shipping PME Chiksan Flowline Fittings 2in FIG1502 Sour Gas Service and Suction Discharge Hose by 40 HQ FCL

 

Labor Day Holiday start from May 1, and resume on May 6. PME sales team is available to answer clients' RFQ about High Pressure Drilling Hoses and Chiksan Flowline Iron Fittings, technical parameters and purchase orders during the holiday.

 

Please Email: contact@pmeindustrial.com or WhatsApp: +86-13808990736 for instant support.

 

For the last PME shipment in April, we handover the packages of hoses and flowline fittings and load the packages into 40 HQ container. The below photos of low pressure hoses and flow back irons are partial of this batch shipment. Happy Labor Day and Wish we all have a fruitful month in May.  

 

Cushion Elbow, 3" FIG1502 MxF

Target Tee, 3" FIG1502 MxFxF, FxMxF

Plug Valve, 2" FIG1502 MxF

Test Plug Male Cap 4" FIG206, C/W 1/2" NPT

Adjustable Choke Valve, 2" FIG1502 MxF

Oil Suction and Discharge Hose

4", WP 300 Psi, 3 Meters

What is the difference of Grade A, Grade B, Grade C, Grade D, Grade E and Grade F API 7K High Pressure Hoses

 

The high pressure hoses show PME Grade E Rotary Vibrator Hoses with integral hammer lug unions at both ends, male sub and wing nut at one ends and female sub at the other end. The over length of hose assembly is 50 feet.

 

According to API Spec 7K Drilling and Well Servicing Equipment, high pressure hoses assembly are identified by grades as the table 10.

 

Grade A, Grade B, Grade C, Grade D, Grade E and Grade F are classified by rated working pressure. It's also identical to the design pressure of PME high pressure drilling hoses.

 

API 7K Grade A PME Rotary Drilling Hoses rated working pressure 1500 Psi, test pressure 2250 psi, sized in 2", 2-1/2"

API 7K Grade B PME Vibrator Hoses rated working pressure 2000 Psi, test Pressure 3000 Psi, size in 2", 2-1/2"

API 7K Grade C PME Cement Hoses rated working pressure 4000 Psi, test Pressure 6000 Psi, size in 2", 3", 4" and 5"

API 7K Grade D PME Mud Delivery Hoses rated working pressure 5000 Psi, test Pressure 7500 Psi, size in 2" to 6"

API 7K Grade E PME High Pressure Drilling Hoses rated working pressure 10000 Psi, test Pressure 15000 Psi, size in 2-1/2" to 6"

API 7K Grade PME High Pressure Drilling Hoses rated working pressure 15000 Psi, test Pressure 22500 Psi with or without 2 sets of safety clamps which are not used as hoisting devices

 

Hydrostatic pressure test is performed on PME high pressure hoses assembly at the working pressure, which is 1.5 time of the working pressure. The test medium for hydrostatic pressure test is water.  

 

Email: contact@pmeindustrial.com or WhatsApp: +86-13808990736 for price quote of the high pressure drilling hoses, choke and kill hoses line, blowout preventer hoses and flowline flowback Chiksan Style Irons! 

Find Price for Chiksan Style Cementing Hose Loop with Swivel Joint Style 10 Style 50 2 Inch FIG1502 10 FT 105 MPa

High pressure Chiksan circulating and cementing hose loops are assembled by integral pup joints, long sweep swivel joint and hammer union ends.

 

PME Chiksan FIG 1502 cementing and circulating hose loops are manufactured as API 16C with swivel joint 2", 3", 4" in long sweep Style 10 and Style 50.

 

The hose loops serve for cementing, acid fracturing, well testing lines up to working pressure 42 MPa, 70MPa, and 105 MPa.

 

The union ends in FIG602, FIG1002 and FIG1502 in the cementing and circulating hose are good for fast make up and quick break out.

 

PME Cementing and circulating hoses are designed and manufactured for standard service and sour gas service NACE MR-01-75 as API 16C Specification.

 

Extended length of the PME hose loop are in 9.5 feet, 10 feet and 12 feet. Normally the swivel joint required by PME customers are in style 10 and style 50. But other swivel joint style 20, style 30, style 40, style 80, style 70 and style 100 are optional as long radius swivel joint for PME Industrial cementing and circulating hose.

 

Cementing Hose Loop 2" x 10 FT, WP 15000 Psi

C/W Swivel Joint 2" FIG1502 Style 50/10

 

Swivel Joint 2" FIG1502 Style 50, WP 15K

 

Contact PME Sales Team today for hose loop and swivel joint HS Code, cementing and circulating specs in PDF, by Email contact@pmeindustrial.com or call directly +86 138 1899 0736

 

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

The mud tank union hammer seal unions are offered by PME Industrial in sizes of 6 inch, 8 inch, 10 inch, 12 inch.

PME mud tank union hammer seal unions feature excellent connecting and sealing with flanged connection for mud tanks and line connections.

 

The mud tank union hammer seal unions are offered by PME Industrial in sizes of 6 inch, 8 inch, 10 inch, 12 inch.

 

Mud tank union hammerseal unions are designed to connect the drilling mud tanks quickly with working pressure to 150 Psi.

 

The medium of PME mud tank union hammer seals unions are drilling mud, oil, water and slurry for oilfield mud tank systems.

 

Mud Tank Union

Hammer Seal Union

Size: 6", 8", 10", 12"

WP: 150 Psi

Brand: PME INDUSTRIAL

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

What is the pressure for PME 1/2" 3/4" 1" 5000 PSI Hydraulic Hose F JIC Fitting 90 Deg M NPT?

PME Industrial 1/2", 3/4", and 1" hydraulic hoses are ideal for general purpose high pressure hydraulic applications.

 

The hydraulic hoses delivers working pressure 5,000 Psi are commonly used in hydraulic systems with lightweight and flexibility.

 

Featuring right a 1/2", 3/4" and 1" NPT male pipe thread at one ends, and Female JIC Fitting for the other ends, PME high pressure HYD hoses measures 1/2 in, 3/4 in, and 1 in inside diameters x 100 cm, 200 cm, 300 cm, 500 cm and 600 cm long.

 

The connections of hydraulic hoses PME produce are in 37 Degree JIC Hydraulic Fittings, which are widely used as hydraulic fluid connectors in fluid delivery industry.

 

JIC also known as Joint Industrial Council Fittings are the flare hose fittings with straight threads of 37° flare seating surface. The JIC fittings crimped for PME hydraulic hoses can perform at pressure up to 5000 psi.

 

Hydraulic Hose Assembly

Inside Dia: 1/2", 3/4", 1"

Working Pressure: 5000 Psi

Ends: F JIC, M NPT, 90 DEG.

Length: As Clients' Request

Brand: PME INDUSTRIAL

 

For other hydraulic hoses demand, hit PME team up for good offer and hoses specification.

Email: contact@pmeindustrial.com

Cell / WhatsApp: +86-13818990736

 

Hydraulic Hose; DIA: 1 1/4", Length: 1.5 mtr; 5000psi, Both End Female NPT

Hydraulic Hose; DIA: 1 1/4", length: 2.5 mtr; 5000psi, Both End Female NPT

20 M x 1" 3000 Psi Pressure Hose c/w quick coupling

20 M x 1-1/4" 3000 Psi return hose c/w quick coupling

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

 

Good Day to Ship Rotary Bumper Hose Orders To PME Industrial High Pressure Hoses Buyers Grade E API 7K

Labor Day Holiday is approaching, and PME team move quickly to ship HI Pressure rotary hoses and bumper hoses to customers. The hoses sized in 4 inch, Grade E, length in 15ft, 75ft and 23 meters are well assembled, tested as API 7K Standard and and packed good for shipping by ocean.

 

For more information, hit PME up for high pressure hoses need blow listed.

 

Hose, Cementing, 10K, 2" ID X 50 Feet Long,, With 2 Inch Fig 1502 Hammer Union Male /Female On Ends. Working Pressure: 10,000 Psi Test Pressure: 15,000 Psi  

 

Rotary Drilling Hoses, API Spec 7K Grade D, WP 5000 psi, I.D. 3”, length 30’, with couplings male 3” NPT threads both ends

 

Vibrator Hose Assy 3-1/2" Id X 30 Ft, 40 Ft, 80 Ft Long, 5000 Psi W.P., Class-D,7500 Psi Test Pressure, W/ 4" Weco Union Fig 1002 On Each End (Male & Female)

 

15Ft Drilling Hose. 4" ID, Max Working Pressure 10K PSI, Grade F, Tested at 15K PSI, API SPEC-7K, UNIONS 4" FIG-1003, 10K PSI , Both Ends Male, With safety clamp, chain and lifting eyes , Length: 84 ft,

 

Drilling Mud Hose 5", WP 7500 PSI, TP 11250 PSI, Temp. Range II, Grade E, Length 20 MT (65.61 ft), Hammer Union Male and Female Fig 1002

 

API 7K Bumper hose ID-6" x FIG 1002 M/F Hammer union , L-15 ft, WP.5000PSI, TP.7500 PSI, Safety Clamp , Chain And Lifting Eyes

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Target Elbow Cushion Tee 3 Inch FIG1502 NACE Rated Optimize your Flowback Control

PME Chiksan Style integral fittings, sized in 3" FIG1502 Target Elbow and Target Tee, NACE Rated, Working Pressure up to 70 MPa, are ready for dispatch to PME prestigious client.

 

The target elbow and Target Tee 3", Connections Figure FIG 1502, are ideal for flowback operation. PME integral fittings function and interchange with the FMC Chiksan Flowlines Fittings.

 

Normal Size: 2", 3", 4"

Rating Pressure: 6,000 Psi, 10,000 Psi, 15,000 Psi CWP

Connection: API Flanges, Union Ends Figure 602, Figure 1002, Figure 1502 Connections

Target Elbow Configuration: Male x Female

Target Tee Configuration: Female x Male x Male, Female x Female x Male, Male x Male x Male

Standard Service and Sour Gas Service Both Available, Meet NACE MR-01-75

 

For more information, hit PME up for more fracing, well serving and flow iron demand.

Call / WhatsApp: +86-13818990736 or email at contact@pmeindustrial.com

 

Chiksan Loop Assembly, 2" FIG 1502, 10 FT Long, with Swivel Joint Style 50, Style 10 CWP 10000 Psi, AISI 4130 Material, Sour Service

Chiksan Loop Assembly, 2" FIG 1502, 12 FT Long, with Swivel Joint Style 50, Style 10 CWP 10000 Psi, AISI 4130 Material, Sour Service

 

Swivel Joint Long Sweep Style 10, 2" FIG1502 MxF, MxM, FxF, CWP 10000 Psi, AISI 4130 Material, Sour Service

 

Integral Pup Joint, 2" FIG1502 MxF, 5 FT 10 FT Long, CWP 10000 Psi, AISI 4130 Material, Sour Service

 

Low Torque Plug Valve Assembly, 2" x 2" FIG1502 MxF, CWP 10000 Psi, AISI 4130 Material, Sour Service

 

Integral 90 Deg Long Sweep Elbow, 2" FIG1502 MxF, CWP 10000 Psi, AISI 4130 Material, Sour Service

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Find the difference of choke hose line and kill hose line from China API 16C hose china suppliers

API 16C certified choke and kill hose line are the essential part of choke and kill system during drilling and exploration.

 

As flexible tubing to choke and kill manifold, the coflex hoses transfer the well fluids with high pressure and flow rate of well control operation. The inner and outer liners used for fabricating PME coflex hose in high abrasion resistance and corrosion resistance.

 

The choke hose and kill hose feature stainless steel wrapped also called SS armored. The SS armor protects PME Industrial choke hose body rubber from damage and cut, which highly reduce the downtime and improve the drilling efficiency.

 

PME choke kill hose line are necessary for choke and kill manifold to control the flow fluid. The medium can be transferred like mud, oil, gas and other high pressure medium with working pressure rated from 5000 Psi to 15000 Psi.

 

For connecting various oil field equipment, PME Industrial provide a variety of couplings of choke and kill hose as hammer unions, API flanges connections and other specific couplings as clients' demand.

 

3" x 5K x 50 FT Choke and Kill Well Test Hoses are available. Details are listed below:

 

PME Choke Kill Hose Line, 3" x 50 FT, Choke Kill Hose Line, WP 5K

Length 50 Feet

End A 3" FIG 1502 Male

End B 3" FIG1502 Female

Standard: API Spec 16C 3rd Edition

Working Pressure 5000 Psi

Test Pressure 7500 Psi

Fire Rated, SS Armored

Brand Name: PME Industrial

 

You may find good price and technical support about the choke kill hose line by contacting PME team today!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

PME 3 x 3 Inch Plug Valve Gear Operated for Frac Flowback Work

PME gear operated plug valves are designed and forged of high strength alloy steel body in house. The gear operator is easy to apply low torque for PME larger  plug valves in 3" FIG1502, 4" FIG 1002, and 4" FIG 1502.

 

PME low torque plug valves apply on the high pressure manifold for cementing, fracturing, acidizing and coiled tubing for harsh oil and gas industry. PME gear operated plug valves are easy to operate, maintain and competitively priced.

 

Besides of manual plug valve and hydraulic operated, the flowline valves with gear operated features low torque, hand wheel operation and working pressure up to 15000 Psi for standard service and 10000 Psi for sour gas (H2S) service.

 

The plug valves with hand wheel are manufactured by PME Industrial accroding to API 6A and sour gas (H2S) service, also meet NACE MR-01-75. The gear operated plug valves consist of valve body, plug, insert set, seal kit and roll pin and hand wheel. Repair Kits are options.

 

PME Industrial gear operated plug valves adopt hammer union connections with male and female end, other connections Threaded, API flanges can work as PME Clients' requirement.

 

Plug Valve, Gear Operated, NACE Rated

Size: 3" x 3" ((Male x Female)

Working Pressure: 10000 Psi

Ends: 3" FIG1502 MxF

Design Standard: API 6A / API 16C

Manufacturer: PME Industrial

Min. / Max. Repair Kit: Available

Media: Oil, Gas, Water

 

Please email contact@pmeindustrial.com or give us a direct call +86 138 1899 0736 for a quick offer and technical support! Whatsapp +86 138 1899 0736 is available for on line response about gear operated plug valve details!

 

PME Industrial take pride to manufacture and suypply the quality flow control flowback products with high performance and wear resistance.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Are hydraulic hoses fire fighter fire resistant?

 

PME Blow Out Preventer hoses, also named hydraulic fire resistant hoses, works for hydraulic application with BOP control system. Normally the size of BOP hoses are less than two inches, while its working pressure is about 3000 psi and 5000 psi.

 

PME hoses assembly fire fighter are stainless steel armored to withstand the fire, high heat and working pressure in-site. The hoses are designed as API 16D Specs.

 

As leading hoses blowout preventer manufacturer, PME hydraulic hoses are assembled with hammer unions and NPT to suit for miscellaneous connections of the equipment.

 

Fire Resistant Blow Out Preventer Hose

ID: 1", 1-1/2"

Working Pressure: 5000 Psi

Ends: 1" NPT Male, 1-1/2" NPT Male

SS Armored, API 16D

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Plug Valve Flanged 2 Inch WP 2500 LB Sour Service

PME plug valves normally are ends with hammer union Figure 602, Figure 1002 and Figure 1502. For some the flow control equipments which are flanged, the plug valves in flanges connection are required.

 

Order from PME for plug valves flanged for long-lasting performance. These valves features working pressure 2500 LB, which can serve for both standard service and sour service proven in the oilfield for years.

 

Plug Valves

Size: 2" (50mm)

Working Pressure: 2500 LB

Ends: Flanged

Service: Sour Service

Option: Repair Kits

 

For more union ends low torque plug valves, don't hesitate to contact PME Sales Team!

 

Please email us the size, working pressure and connection, PME will be back with good offer for your project!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com