What diameter is rotary vibrator assembly and how long drilling hose as maximum length

PME Normal ID 2-1/2", 3", 3-1/2" and 4" rotary vibrator hoses come with safety clamps, hose lifting collar and sling.

 

Looking for rotary hose assembly Grade D for oil field services and supplies, please provide the dimension, connection and length.

 

Maximum length would be 100 ft (30 meters). PME Team can produce longer API 7K mud hoses assembly for local drilling contactors' operation.

 

Fittings for PME rotary vibrator assembly are hammer union male sub and nut, female sub, hubs and API flanges.

 

PME focus on quality high pressure rotary hose and mud hose. Each hose assembly is fabricated and inspected as API 7K standard for both standard and sour gas service.

 

Full set of mill of certificates only can be issued upon deeply inspection, including, not limited to, hydrostatic test for test pressure, compliance certificate and hose coupling material certificate.

 

For technical requirement rotary hoses PME-ASSY-3-1-2IN-WP5K-API7K, kindly contact email PME team by email contact@pmeindustrial.com or WhatsApp +86 138 1899 0736 for quick answer.

 

Rotary Hose / Mud Hose, 3-1/2", WP 5000 Psi, TP 7500 Psi, Butt Welded Union Ends 4" FIG1002 Male x Female, Long 60 Feet as per photo below, with delivery fluid water based or oil based sully, stainless steel armor is available. Package good by sea freight is iron box or plywood box.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

What is the difference of Grade A, Grade B, Grade C, Grade D, Grade E and Grade F API 7K High Pressure Hoses

 

The high pressure hoses show PME Grade E Rotary Vibrator Hoses with integral hammer lug unions at both ends, male sub and wing nut at one ends and female sub at the other end. The over length of hose assembly is 50 feet.

 

According to API Spec 7K Drilling and Well Servicing Equipment, high pressure hoses assembly are identified by grades as the table 10.

 

Grade A, Grade B, Grade C, Grade D, Grade E and Grade F are classified by rated working pressure. It's also identical to the design pressure of PME high pressure drilling hoses.

 

API 7K Grade A PME Rotary Drilling Hoses rated working pressure 1500 Psi, test pressure 2250 psi, sized in 2", 2-1/2"

API 7K Grade B PME Vibrator Hoses rated working pressure 2000 Psi, test Pressure 3000 Psi, size in 2", 2-1/2"

API 7K Grade C PME Cement Hoses rated working pressure 4000 Psi, test Pressure 6000 Psi, size in 2", 3", 4" and 5"

API 7K Grade D PME Mud Delivery Hoses rated working pressure 5000 Psi, test Pressure 7500 Psi, size in 2" to 6"

API 7K Grade E PME High Pressure Drilling Hoses rated working pressure 10000 Psi, test Pressure 15000 Psi, size in 2-1/2" to 6"

API 7K Grade PME High Pressure Drilling Hoses rated working pressure 15000 Psi, test Pressure 22500 Psi with or without 2 sets of safety clamps which are not used as hoisting devices

 

Hydrostatic pressure test is performed on PME high pressure hoses assembly at the working pressure, which is 1.5 time of the working pressure. The test medium for hydrostatic pressure test is water.  

 

Email: contact@pmeindustrial.com or WhatsApp: +86-13808990736 for price quote of the high pressure drilling hoses, choke and kill hoses line, blowout preventer hoses and flowline flowback Chiksan Style Irons! 

Good Day to Ship Rotary Bumper Hose Orders To PME Industrial High Pressure Hoses Buyers Grade E API 7K

Labor Day Holiday is approaching, and PME team move quickly to ship HI Pressure rotary hoses and bumper hoses to customers. The hoses sized in 4 inch, Grade E, length in 15ft, 75ft and 23 meters are well assembled, tested as API 7K Standard and and packed good for shipping by ocean.

 

For more information, hit PME up for high pressure hoses need blow listed.

 

Hose, Cementing, 10K, 2" ID X 50 Feet Long,, With 2 Inch Fig 1502 Hammer Union Male /Female On Ends. Working Pressure: 10,000 Psi Test Pressure: 15,000 Psi  

 

Rotary Drilling Hoses, API Spec 7K Grade D, WP 5000 psi, I.D. 3”, length 30’, with couplings male 3” NPT threads both ends

 

Vibrator Hose Assy 3-1/2" Id X 30 Ft, 40 Ft, 80 Ft Long, 5000 Psi W.P., Class-D,7500 Psi Test Pressure, W/ 4" Weco Union Fig 1002 On Each End (Male & Female)

 

15Ft Drilling Hose. 4" ID, Max Working Pressure 10K PSI, Grade F, Tested at 15K PSI, API SPEC-7K, UNIONS 4" FIG-1003, 10K PSI , Both Ends Male, With safety clamp, chain and lifting eyes , Length: 84 ft,

 

Drilling Mud Hose 5", WP 7500 PSI, TP 11250 PSI, Temp. Range II, Grade E, Length 20 MT (65.61 ft), Hammer Union Male and Female Fig 1002

 

API 7K Bumper hose ID-6" x FIG 1002 M/F Hammer union , L-15 ft, WP.5000PSI, TP.7500 PSI, Safety Clamp , Chain And Lifting Eyes

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

PME API 7K 1 Inch WP 10000 Psi Hoses WECO 1502 Male Female 30 Meter

 

High pressure hoses featuring in working pressure 10K Psi are normally required as 2" to 5".

 

The smaller size like 1", 1-1/2" also can be produced by PME Industrial for WP 145MPa for special application.

 

For best price and lead time for the below items, you're welcomed to reach PME Sale Team.

 

Manifold Hoses 3" WP 5000 Psi, C/W Ends 4" FIG 1502 MxF, are resistant to oil-based drilling mud.

Manifold Hoses 76mm WP 35 MPa, C/W Flanges 3-1/8" x 5000 Psi, are resistant to oil-based drilling mud.

Manifold Hoses 4" WP 10000 Psi, C/W Ends 4" FIG1502 MxF, are resistant to oil-based drilling mud.

Drilling Hoes 102mm WP70 MPa, C/W Ends 4" BSPT Threaded, are produced as API 7K-2015.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

How to choose the right high pressure hoses China supplier who make jumper hoses in 4 Inch Grade E API 7K Certs

 PME specializes in oilfield high pressure hoses assembly. Our team has extensive experience in the API 7K hose industry.

 

In order to make right choice of kelly hoses and jumper hoses for drilling operation, PME Industrial produce and supply a range of hoses assembly with rated pressure up to 15000 Psi.

 

PME kelly hoses and jumper hoses assembly is comprised of several layer of spiral wire reinforcement. All WP 7500 Psi Hose are in Grade D, delivered with pressure test report, COC and COO for commercial support.

 

4" Kelly hoses and jumper hoses normally equipped with hammer union 4" FIG1002 or FIG1003. API Flanges are also a good option as clients' in-site need.

 

Kelly Hose, Jumper Hose

Size: 4"

Working Pressure: 7500 Psi (Grade E)

Ends: 4" FIG1003 Thread Tr180x8

Length: 15 FT, 75FT

C/W Safety Clamps

 

Send us a direct email if you would like to place an order, or any interests of API 7K Grade E Kelly and Jumper Hoses.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Need 15000 Psi 10000 Psi Working Pressure Cement Hoses Certified by API 7K?

With the confirmation of hose end connections male and female in FIG 1502, PME 2" cement hoses are manufactured as per API 7K Specs.

 

Besides of the connection 2" FIG 1502 MxF, PME Industrial also need some basic technical parameter like working pressure and length to start the cement hoses fabrication.

 

PME cement hoses CWP 10K and CWP 15K come with the certification like COO, COC, Pressure test reports for all hoses, Mill Test Report for metal part and rubber part, and NDT report. All these certificates from PME Industrial are free of charge.

 

Cement Hose

ID: 2"

WP 10000 Psi, TP 15000 Psi

WP 15000 Psi, TP 22500 PSI

Ends: 2" FIG 1502 MxF

Length: 40 Feet

C/W Safety Clamps

 

For good quote of high pressure cement hoses in CWP 10000 Psi, CWP 15000 Psi, contact PME today!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

 

Cement Hose 2 Inch 10 K 40 FT FIG 1502 Black PP Spiral Guard China API 7K Hoses Manufacturer

PME high pressure cement hoses 2" CWP 10K Psi 40 ft  function same as other API 7K Specs hoses, PME swaged cement hoses are used for cement and mud delivery for oil field and cementing repairing.

 

The difference is these PME 2" cement hoses are equipped with Black PP Spiral Guard, which is also named hose protectors. Hose spiral guard (hose protector) in black, yellow, red and blue supplied by PME Industrial can be resistant to abrasion, corrosion and oils. PME black PP spiral guard protect 2" working pressure 10000 Psi cements hoses effectively when the hoses serve under high pressure application.

 

Cement Hose

ID: 2"

WP: 10000 Psi

TP: 15000 Psi

Ends: 2" FIG 1502 MxF

Feature: Black PP Spiral Gurad

C/W Safety Clamps & Lifting Collars

Docus: COC, MTC, Test Reports

 

Furthermore, PME provide Certificate of Origin, Form E, and Form F for customs clearance in destination port.

 

For technical issues or commercial contracts, feel free to contact PME at:

 

Cell/WhatsApp: +86 138 1899 0736, Email: contact@pmeindustrial.com

 

We look forward to your reaching!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

PME Grade D High Pressure Hoses 2 Inch 35 MPa 15 Meter China Manufacturer

PME Grade D high pressure hoses stands for the hoses with working pressure 5000 psi, 35 MPa.

 

Five pieces of 2" Grade D hoses are fabricated in PME shop floor for production and pressure test in 7500 psi.

 

Defining as API Spec 7K 6th, test pressure of PME high pressure hoses is 1.5 times of its working pressure.

 

Grade D hoses is functioning as rotary vibrator hose 5000 psi connection standpipe and pump and mud hoses pumping mud at pressure of 35 MPa in oilfield drilling operations.

 

Hoses ID ranges from 2", 2-1/2", 3" and 4" with connections hammer unions, male and female subs, hubs and API flanges.

 

Refer to PME high pressure hoses photos and technical datasheet as below.

 

High Pressure Hoses, Grade D

Size: 2"

Working Pressure: 5000 Psi (35MPA)

Ends: Hammer Union 2" FIG1502 MxF

Length: 15 m

QTY: 5 pcs

 

For more details as Min. Burst Pressure, Min. Bend Radius, Packing Details, etc, call us today!

 

We look forward to your reaching!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com