显示标签为“FIG1502 crossover”的博文。显示所有博文
显示标签为“FIG1502 crossover”的博文。显示所有博文

2026年11月18日星期三

Matching FIG1502, FIG1002, FIG2202, and Flanged Crossovers on Drilling Rigs

Field Selection Guide: Bridging Hammer Union Figures and Flanged Manifolds

On active drilling rigs and well testing locations across Southeast Asia, surface piping layouts frequently combine multiple connection standards. Field crews routinely need to tie 2-inch high-pressure treating lines into 3-inch manifold headers or adapt threaded utility piping directly onto flanged valve ports without hot-work welding on site.

Selecting precision-machined API 6A crossover adapter assemblies ensures dimensional interchangeability, mechanical retention, and verified pressure containment across diverse rig circuits.

2 inch NPT to API flange crossover Class 150 raised face with 4 bolt holes

Figure 1: 2" NPT Female x 2" API Flange Class 150 Raised Face crossover with 4 bolt holes.

1. Pressure Rating Rules When Crossing Hammer Union Figures

When transitioning between different hammer union figures and nominal bore sizes, engineers must account for the lower-rated end connection governing overall assembly pressure limits:

  • FIG1502 to FIG1002 Transitions: A 2" FIG1502 Female x 3" FIG1002 Male crossover bridges 15,000 PSI iron to 10,000 PSI manifold headers, where system operating pressure is capped at 10,000 PSI by the FIG1002 connection.
  • Full 15,000 PSI Transitions: Pairing a 2" FIG1502 Male (with wing nut) to a 3" FIG2202 Female sub maintains a continuous 15,000 PSI cold working pressure rating across both ends for high-pressure well control and stimulation lines.
Hammer union crossover FIG1502 female to 3 inch FIG1002 male with wing nut

Figure 2: 2" FIG1502 Female x 3" FIG1002 Male reducing hammer union crossover with wing nut.

2. Threaded-to-Flanged Interfaces in Auxiliary Rig Circuits

For low-pressure utility manifolds, pump suction headers, and gauge lines, transitioning between threaded pipe and bolted flanges requires accurate bolt-hole and gasket face machining:

  • Class 150 Raised Face Flanges: The 2" NPT Female x 2" API Flange Class 150 RF adapter utilizes a standard 4-bolt-hole pattern to mate cleanly with companion flanges while providing a female NPT port for threaded piping.
  • Alloy Steel Material Integrity: Machining adapters from forged alloy steel ensures thread durability during repeated field makeup and breakout cycles.
15000 psi crossover adapter 2 inch FIG1502 male with wing nut to 3 inch FIG2202 female

Figure 3: High-pressure 15,000 PSI 2" FIG1502 Male x 3" FIG2202 Female crossover adapter.

QA/QC Documentation Checklist for API 6A Crossovers:

  • Verify API Spec 6A compliance and Standard Service material designation.
  • Confirm inclusion of Material Mill Certificates (MTR) and Certificate of Conformance (CoC).
  • Review hydrostatic Pressure Test Certificates prior to putting adapters into active service.

To review technical specifications, pressure ratings, and custom machining capabilities for wellhead and flowline transitions, visit Shanghai PME Industrial's official product portal to explore their complete API 6A crossover adapter offerings.

Need Custom API 6A Crossover Adapters?

Get direct manufacturer pricing, full MTR documentation, and export delivery from Shanghai PME Industrial.

View Product Specification Page