API SPEC 7K ROTARY DRILLING HOSE 2" x 40 FT

Shanghai PME Industrial supplies API Spec 7K certified API 7K Rotary Drilling Hose 2 Inch 40 FT rated for 2000 PSI and 3000 PSI working pressure. Featuring oil-resistant synthetic rubber tubes, high-tensile wire braid reinforcement, and extra oil-resistant covers with 2" Male Threaded or Pin x Pin LP end connections for onshore and offshore drilling rig operations in Indonesia.

API 7K Rotary Drilling Hose 2 Inch 40 FT (2000 PSI & 3000 PSI Working Pressure)

API SPEC 7K CERTIFIED | 2 INCH ID x 40 FT LENGTH | SYNTHETIC RUBBER & EXTRA OIL-RESISTANT WIRE BRAID COVER

In high-pressure mud circulation systems, standpipe-to-swivel and top drive flex lines must endure severe mechanical vibration, high mud velocity, and aggressive chemical exposure. Shanghai PME Industrial manufactures heavy-duty API 7K Rotary Drilling Hoses in 2-inch Inner Diameter (ID) and 40-foot length, specifically designed for high-pressure drilling fluid transport. Certified under API Spec 7K standards, these flexible Kelly and vibrator hoses deliver uninterrupted mud delivery across onshore and offshore rig installations.

Engineered with oil-resistant synthetic rubber inner tubes, multi-layer high-tensile wire braid reinforcement, and extra weather and oil-resistant protective covers, our 2 inch 40 FT rotary hoses are available in 2000 PSI working pressure and 3000 PSI working pressure with Pin x Pin LP (Line Pipe) male connections, serving major oilfield drilling contractors and purchasing engineers across Indonesia.

📷

2" 40 FT 2000 PSI Hose Body Stencil

2000 PSI Hose Body Stencil Marking

2 inch ID, 40 FT length, and 2000 PSI working pressure rating along the outer cover.

📷

2" 40 FT 3000 PSI Hose Body Stencil

3000 PSI Hose Body Stencil Marking

2 inch ID, 40 FT length, and 3000 PSI working pressure rating along the outer cover.

📷

Export Stacking & Sea Freight Loading

Export Crate Stacking & Indonesia Freight

Coiled 40 FT rotary hoses pre-inspected, stacked, and crated for ocean freight shipment to Indonesian discharge ports.

Technical Specifications Matrix: 2" x 40 FT API 7K Rotary Hoses

Specification Parameter	Model A: 2000 PSI Working Pressure	Model B: 3000 PSI Working Pressure
API Standard Certification	API Spec 7K Certified / ISO 14693	API Spec 7K Certified / ISO 14693
Inner Diameter (ID)	2 Inch	2 Inch
Hose Length	40 Feet per Piece (12.19 Meters)	40 Feet per Piece (12.19 Meters)
Working Pressure	2000 PSI	3000 PSI
End Connection Type	Pin x Pin LP (Line Pipe) / Male Thread 2"	Pin x Pin LP (Line Pipe) / Male Thread 2"
Inner Rubber Tube	Oil-Resistant Synthetic Rubber	Oil-Resistant Synthetic Rubber
Reinforcement Layer	High-Tensile Steel Wire Braid Structure	High-Tensile Steel Wire Braid Structure
Outer Cover Material	Extra Oil & Weather Resistant Cover	Extra Oil & Weather Resistant Cover
Service Compatibility	Water-Based Mud, Oil-Based Mud (OBM)	Water-Based Mud, Oil-Based Mud (OBM)

Application Analysis: API 7K Rotary Hoses for Indonesia Drilling Rigs

In active Indonesian drilling fields across East Kalimantan, Sumatra, and the Java Sea, high humidity, salt fog, and continuous drilling fluid pulsation impose severe demands on mud circulating hoses. Deploying PME API 7K 2" 40 FT rotary hoses addresses primary rig fluid conveyance challenges:

1. Flexible Standpipe to Swivel Connection

Serves as a flexible high-pressure mud transfer conduit between the top of the standpipe and the travelling swivel or top drive, absorbing vertical travel motion and mechanical vibration during drilling operations.

2. Synthetic Rubber Resistance to Oil-Based Mud (OBM)

Formulated with oil-resistant synthetic inner tubes, these hoses prevent interior blistering, swelling, or structural erosion when handling aggressive oil-based muds, diesel-base fluids, and heavy drilling chemicals.

3. Tropical Marine Corrosion Protection

The wire braid reinforcement is protected by an extra oil-resistant outer cover that shields against mechanical scuffing, severe tropical UV exposure, and salt spray corrosion typical of Indonesian offshore and swamp rig locations.

Quality Assurance & Manufacturing Standards

• Strict API Spec 7K Compliance: Designed, manufactured, and pressure-tested in full accordance with API Spec 7K requirements for rotary drilling and vibrator hoses.
• Precision Factory Swaged Fittings: High-strength end connections (Male Threaded 2 inch and Pin x Pin LP) are integrally swaged to ensure leak-free integrity under peak pressure surges.
• 100% Hydrostatic Pressure Testing: Every 40 FT hose assembly undergoes rigorous hydrostatic testing at designated proof pressures prior to shipment.
• Complete Export Traceability: Supplied with comprehensive mill test certificates, pressure test charts, and serial tracking for seamless client approval.

Get Factory Quotes for API 7K 2" 40 FT Rotary Hoses

Shanghai PME Industrial supplies API Spec 7K certified rotary hoses, vibrator hoses, high-pressure flow iron, and drilling rig accessories to global oilfield contractors. Contact us today for competitive pricing and direct shipment to Indonesia.

Contact Our Technical Sales Team

Request Technical Quote

Why Fig 602 Double Check Valve Hammer Unions Matter in API 16D Koomey Units

Shanghai PME Industrial provides expert technical insights on Fig 602 Self-sealing Unions and Double Check Valve Hammer Unions rated at 6000 PSI for API 16D Koomey units in Indonesia and Malaysia.

Ensuring Hydraulic Integrity: Why Fig 602 Double Check Valve Hammer Unions Matter in API 16D Koomey Units

Oilfield Equipment Engineering | Southeast Asia Export Project

In modern drilling operations, maintaining absolute control over blowout preventer (BOP) hydraulic systems is non-negotiable. For active oil and gas fields across Indonesia and Malaysia, hydraulic control manifolds and accumulator units—commonly known as Koomey units—rely heavily on specialized components that prevent fluid backflow under extreme pressures. Among these, the Fig 602 Self-sealing Union plays a vital role as a heavy-duty Double Check Valve Hammer Union.

Internal Check Valve Structure of Fig 602 Self-Sealing Union

1. The Engineering Function of Double Check Valve Hammer Unions

Rated at 6,000 PSI CWP, the Fig 602 self-sealing union is uniquely engineered with an internal double check valve mechanism. Unlike standard utility unions, this design permits unrestricted fluid transmission in the designated forward direction while automatically and instantaneously sealing against any reverse pressure gradient. This prevents fluid cross-contamination and maintains constant line isolation within critical hydraulic circuits.

Exploded Component View: Male Sub, Female Sub, and Three-Lug Nut

2. Compliance with API 16D Standards for Koomey Units

Control systems built to API 16D specifications demand absolute material traceability and pressure containment reliability. PME’s Fig 602 unions are manufactured from premium forged alloy steels, ensuring full dimensional compatibility and interchangeability with major international oilfield hardware brands. Their robust three-lug nuts allow rapid make-up and secure field assembly under rigorous offshore and onshore conditions.

Fully Assembled Side Profile of 6000 PSI Fig 602 Union

3. Supporting Regional Drilling Operations in Southeast Asia

As exploration and production activities intensify across Indonesia and Malaysia, equipment reliability directly dictates project uptime. Supplying field-proven hardware that meets stringent international safety benchmarks helps operators eliminate unplanned downtime associated with hydraulic leaks or valve failure.

Looking for Certified 6000 PSI Flow Control Fittings?

Explore detailed sizing charts, pressure ratings, and direct factory quotation options on our official product page:

👉 Shanghai PME Industrial - Fig 602 Self-Sealing Union Product Page

Shanghai PME Industrial provides expert procurement insights on API 7K Kelly Hoses and API 16D Fire Proof Flexible Hoses for oilfield drilling projects in the UAE.

Why UAE Drilling Rigs Rely on API 7K Kelly Hoses & API 16D Fire-Proof Hoses

Oilfield Procurement Guide | PME Industrial Export Project

Operating in the demanding onshore and offshore oilfields of the United Arab Emirates requires uncompromising equipment standards. Fluid transfer lines and well control systems must endure extreme ambient desert heat, high-velocity abrasive mud flows, and rigorous safety mandates. In this project overview, we examine how matching certified API 7K rotary hoses with API 16D fire-resistant armored hoses ensures seamless drilling efficiency.

API 7K Kelly Hose (2" x 45 ft, WP 5000 PSI) with FIG 1502 Union Connections

1. Dynamic Mud Circulation: The Role of API 7K Rotary Hoses

The rotary kelly hose acts as the critical flexible link between the standpipe and the moving top drive. For UAE drilling rigs, the 2" x 45 ft WP 5000 PSI Kelly Hose is engineered with high-tensile steel wire plies to withstand continuous vertical flexing and heavy pressure pulsations. Integrated with 2" FIG 1502 male x female hammer union ends, it guarantees secure, leak-free performance under high-flow mud circulation.

API 16D Fire Proof Armored Hose (1" x 6 m, WP 6000 PSI) with NPT Threads

2. Well Control Safety: API 16D Fire-Resistant Armored Hoses

Blowout preventer (BOP) control systems require extreme thermal protection. The 1" x 6 m WP 6000 PSI Fire-Proof Armored Hose features an interlocking stainless steel outer shield combined with high-temperature insulation layers. Compliant with API 16D specifications, this hose preserves hydraulic integrity even when exposed to direct flames or extreme radiant heat in desert environments.

Seaworthy Export Plywood Crate Packaging for Safe Transit to UAE

3. Seaworthy Export Packaging & Delivery

To prevent transit damage during long-distance maritime shipping from China to Middle Eastern ports, all hose assemblies are meticulously packed in heavy-duty export plywood crates. Internal moisture barriers, end thread protectors, and secure bracing ensure that products arrive at the rig site ready for immediate installation.

Looking for Certified Oilfield Hoses?

Explore full technical data sheets, working pressure charts, and factory direct quotations directly on the official product page:

👉 Shanghai PME Industrial - API 7K & API 16D Hose Solutions

15000 PSI FIG 2202 Integral Fittings for H2S Sour Service Operations

High-pressure sour oilfield environments demand uncompromising structural integrity for surface fluid control equipment. Hydrogen sulfide (H2S) exposure combined with 15,000 PSI working pressure creates severe risks of sulfide stress cracking (SSC) and mechanical wear. To address these extreme conditions, selecting properly forged 3" FIG 2202 Integral Fittings is essential for temporary flowline safety.

Figure 1: 3" FIG 2202 x 2" FIG 1502 Integral Crossover Adapter for Sour Service Transitions

Key Considerations for FIG 2202 Sour Service Iron

Unlike standard FIG 1502 components used in sweet service, FIG 2202 hammer union connections and integral fittings are specifically manufactured from heat-treated alloy steel complying with NACE MR0175 / ISO 15156 standards. One-piece forged construction removes potential thread leakage points, offering maximum safety during high-pressure fracturing, acidizing, and well testing operations.

Figure 2: 3" FIG 2202 90-Degree Forged Integral Elbow (MxF)

Versatile Configurations in Temporary Surface Manifolds

To maintain flexible line layouts under high-velocity slurry flow, field operators rely on a combination of essential components:

• Integral 90° Elbows: Feature reinforced outer walls to withstand fluid erosion at high flow velocity.
• Crossover Adapters: Provide safe size and pressure transitions between 3" FIG 2202 (15K H2S) and 2" or 3" FIG 1502 connections.
• Integral Pup Joints: Available in standard lengths (e.g., 6 ft) to establish rigid, vibration-resistant temporary flowlines.

Figure 3: 3" FIG 2202 6 FT Seamless Forged Pup Joint (15,000 PSI CWP)

Looking for reliable 15,000 PSI CWP sour gas flowline components? Explore detailed product specifications and factory direct supply options on PME Industrial's Official FIG 2202 Product Page.

API 16D BOP Fire Proof Flexible Hose: Engineering Breakdown & Field Applications

Ensuring Well Control Safety: The Vital Role of Certified BOP Fire Proof Hoses

Technical Overview | API 16D Compliance & High-Pressure Hydraulic Systems

In high-risk drilling operations, Blowout Preventer (BOP) systems serve as the ultimate defense against uncontrolled wellbore pressure releases. The operational integrity of these actuators relies heavily on continuous hydraulic pressure delivered through specialized fluid conduits. Under severe thermal exposure or mechanical impact, standard hydraulic lines can fail in seconds—making the deployment of a certified bop fire proof flexible hose paramount for offshore and onshore safety compliance.

Leading manufacturer Shanghai PME Industrial Co., Ltd. supplies high-spec, continuous stainless steel armored hose assemblies engineered specifically to meet demanding global standards, including recent deployments to active drilling sites in Indonesia.

Precision-machined male NPT end fitting with heavy-duty stainless steel armor protection.

Key Engineering Features of API 16D Hose Assemblies

• API Spec 16D Fire Resistance: Built with multi-layer thermal barriers to maintain full 5,000 PSI operating pressure even during direct flame exposure up to 700°C–1000°C, providing critical response time during emergency shut-ins.
• Stainless Steel Armor Shield: High-grade 304/316 outer SS armor guards the core hose against physical crushing, severe mechanical abrasion, and marine atmospheric corrosion.
• Male NPT Threaded Connections: Standardized tapered thread profiles ensure metal-to-metal sealing and direct integration into BOP manifolds and accumulator pods without adapters.

1" 5000 PSI fire-proof hose coiled and prepared for export packaging.

Completed workshop batch undergoing 100% hydrostatic pressure testing.

Standard Technical Configurations

Specification	Technical Standard
Nominal Inner Diameter (I.D.)	1 Inch (DN 25)
Working Pressure Rating	5,000 PSI (34.5 MPa)
End Connection Types	1" Male NPT / Line Pipe Thread Ends
Available Standard Lengths	20 FT, 51 FT, 62 FT (Customizable)
Flame Certification	API Spec 16D Fire Tested Compliant

Need Detailed Engineering Drawings or Project Quotes?

Visit the official Shanghai PME Industrial product showcase for complete dimension charts, certification records, and direct factory inquiry options.

Explore Full Product Specifications →

Engineering Analysis: FIG 1502 Integral Fittings (15000 PSI) for High-Pressure Flowline Erosion Control

In high-pressure well stimulation, hydraulic fracturing, and well testing operations, temporary flowlines are constantly subjected to severe cyclic stress, pressure spikes up to 15,000 PSI CWP, and fluid-induced wall thinning. While high-pressure manifolds rely heavily on heavy-duty piping, structural integrity often fails at directional changes and junction points where flow velocity increases dramatically.

To solve fluid turbulence and sand slurry erosion in active drilling sites, engineers specify heavy-duty FIG 1502 Integral Fittings 15000 PSI manufactured directly from seamless forged alloy steel blocks. Below is an engineering breakdown of how differing internal geometries—such as 45° Wyes, Standard 90° Tees, and Cushion Target Tees—perform under harsh field conditions.

2" Wye MxFxF FIG 1502 (15K CWP)

Designed with a 45° angle to reduce internal fluid drag and shear friction in high-rate fluid splitting applications.

2" Standard Tee FxFxM FIG 1502 (15K CWP)

A robust 90° orthogonal block for compact manifold branching, sensor port installation, and auxiliary return lines.

3" Cushion Tee FxMxM FIG 1502 (15K CWP)

Engineered with a dead-end fluid pocket that acts as a hydraulic cushion against abrasive proppant impacts.

Key Internal Flow Dynamics & Erosion Control Mechanisms

Selecting between standard tees, wyes, and cushion target tees depends heavily on fluid composition, slurry velocity, and line configuration:

• 45-Degree Flow Splitting (Wye Design): Traditional 90-degree elbows and tees create sudden direction changes, leading to high turbulence, pressure drop, and localized impingement erosion. The 45° branch angle of the 2" Wye MxFxF enables gradual fluid acceleration, minimizing cavitation when combining or dividing flow lines.
• Hydraulic Cushion Protection (Target Tee Design): In high-volume hydraulic fracturing, proppant slurry acts like liquid sandblasting. The 3" Cushion Tee features an extended blind pocket directly opposite the inlet port. Fluid gets trapped inside this dead-end zone, forcing incoming high-velocity proppant to collide against a static liquid barrier rather than bare forged steel.
• Monolithic Alloy Forging vs. Fabricated Welds: At 15,000 PSI operating pressures (22,500 PSI hydrostatic test pressure), welded pipe fittings pose severe risks of stress cracking. High-spec high pressure hammer union flowline fittings are integrally forged from high-strength alloy steel to maintain structural uniform grain flow compliant with API Spec 16C and NACE MR0175 standards.

Technical Matrix Overview

Fitting Type	End Connection	Pressure Rating (CWP)	Primary Application
2" Wye Fitting	FIG 1502 MxFxF	15,000 PSI	Low-turbulence fluid blending/splitting
2" Standard Tee	FIG 1502 FxFxM	15,000 PSI	Orthogonal distribution & sensor ports
3" Cushion Tee	FIG 1502 FxMxM	15,000 PSI	Erosion buffer in sand-laden frac lines

Looking for API 16C Certified Flowline Components?

Selecting precise hammer union end configurations and wall thickness profiles ensures long-term operational safety across deep drilling and frac spreads. To review detailed engineering dimensional drawings, hydrostatic test certificates, and full product specifications, visit the official product page:

👉 Explore Full Specifications: Shanghai PME FIG 1502 Integral Fittings (15000 PSI) Manufacturing

High-Pressure Drilling Safety: API 16C Choke & Kill Hose Assemblies for North American Oilfields

In high-pressure oilfield operations operating up to 5,000 PSI CWP, maintaining continuous well control and structural flexible piping is vital for operational safety. Modern drilling contractors across North America are increasingly upgrading to certified API 16C Choke & Kill Hose Assemblies to handle heavy pressure fluctuations, corrosive drilling fluids, and dynamic rig vibration.

Recently, Shanghai PME Industrial completed the manufacturing and quality testing of a specialized export batch consisting of both flanged and hammer union flexible assemblies tailored for energy equipment contractors.

Figure 1: 2" FIG 1502 Hammer Union Assembly with Stainless Steel Outer Armour Shield.

Technical Breakdown: Two Core Configurations for Field Deployment

Different rig floor positions demand specialized outer protection and interface designs:

• 2" FIG 1502 Assembly (6 Meters): Built with a heavy-duty Stainless Steel Outer Armour Shield (SS Armour) for maximum mechanical abrasion resistance. The male x female WECO hammer union ends allow rapid makeup on dynamic, high-flex rig lines.
• 3" API Flange Assembly (4 Meters): Fitted with a thermal fire-retardant outer layer and 3-1/8" 5K API Flange ends with R35 ring grooves. Designed for static, high-volume choke and kill manifold lines requiring rigid connection integrity.

Figure 2: 3" Flanged Line with Fire-Retardant Cover & R35 Ring Groove Flange Ends.

Strict Compliance & Factory Hydrostatic Testing

Every single unit undergoes 100% factory hydrostatic proof testing at rated working pressures prior to seaworthy packing. Full Material Test Reports (MTR) and API Spec 16C certificates are supplied to guarantee full compliance on North American jobsites.

Figure 3: Final Inspection and Quality Verification before Export Crating.

For detailed engineering specifications, pressure ratings, and custom length inquiries, visit the official manufacturer page: Shanghai PME Industrial - API 16C Hose Solutions.