Material Inspection Certificate of Manual Choke Valves 2 Inch FIG 1502 CWP 15000 Psi API 16C

PME choke valves are forged in 35CrMo or AISI 4130 material as flow control valves, as essential components of 3-1/8" 5000 Psi 4 ways choke manifold or 3-1/16" 10000 Psi 5 ways choke manifold.

 

Apart from the ends in API flanges 3-1/18" or 3-1/16", PME choke valves can be connection with weco style wing unions in 2" FIG 1002, FIG 1502 or FIG 2202 as multiple serve conditions.

 

PME manual choke valves consist of valve body, valve bonnet, valve stem, valve seat and nuts. Each component is heat treatment with heat number. All chemical composition and mechanical property of PME manual choke valves are clearly noted on the material inspection certificate for quality control system.

 

All PME adjustable choke valves, positive choke valves and manual choke valves are designed and fabricated as API 16C Standard. PME offer choke valves drawing as 2" FIG 1502 first for technical confirmation in condition of the purchase order issued.

 

PME supply the supporting quality documents for our manual choke valves assembly like Material Inspection Certificate, Ultrasonic Testing Report ASTM A388, Magnetic Particle Inspection Report as ASTM E 709, and Penetration Testing Report ASTM E165 for all flow back valves. The acceptance criteria of PME choke valves 2" FIG 1502 is API 16C.

 

Manual Choke Valve

Size: 2"

Ends: 2" FIG 1502

WP: 15000 psi

Standard: API 16C

 

No hesitate to contact PME Team Today! Just a call or an Email, you will receive PME strong support for flow control solution in oil and gas industrial!

Cell/WhatsApp: +86 138 1899 0736, Email: contact@pmeindustrial.com

 

We look forward to your reaching!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

1502 Integral Fittings Cushion Tee Flowline Products interchangeable with FMC Chiksan China Factory

Cushion Tees function as frac tees with integral union ends female and male. 1502 integral fittings require 15000 Psi for standard service and 10000 psi NACE sour gas application.  

 

PME flow products fabricate union cushion tees from high strength forged alloy steel. Two, three and four inches cushion tees are in multiple Figure FIG 602, FIG 1002, FIG 1502 to suit as a variety of pressure rating.

 

Picture below is just the sample of 4" FIG 602 Cushion Tee PME supply flowback iron to our clients for flowback service.

 

Technical Specification:

Cushion Tee

Size: 4"

Ends: 4" FIG 602

Configuration: Female x Male x Female

CWP: 6000 Psi

Service: Standard

 

PME Industrial offer integral fittings as Tees, Block ELLs, Laterals, Crossovers, and Long Sweep 90, 45 degree integral with hammer union ends male and female.

 

All technical documentation as MTRs, Test Reports and NDT reports are available for no additional cost. PME also take the third party inspection like SGS and DNV to assure the quality of high pressure for acidizing, fracturing and well testing.

 

Cell/WhatsApp: +86 138 1899 0736, Email: contact@pmeindustrial.com

 

PME 2", 3", 4" Cushion Tee

2", 3", 4", FIG 602 MxFxF, 6000 Psi

2", 3", 4", FIG 602 MxFxF, 6000 Psi

2", 3", 4", FIG 1002 MxFxF, 10000 Psi

2", 3", 4", FIG 1002 MxFxF, 10000 Psi

2", 3", 4", FIG 1502 MxFxF, 15000 Psi

2", 3", 4", FIG 1502 MxFxF, 15000 Psi

 

We look forward to your reaching!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Hammer Union Wing Nuts 2 Inch FIG 1502 Viton Seal Rings China Manufacturers

 Hammer Union assemblies are fabricated by male ends, female ends and wing nuts.

Figures like FIG 206, FIG 602, FIG 1002, FIG 1502 are marked on the wing nuts, along with the working pressure of hammer union as CWP 2000 Psi, CWP 6000 Psi, CWP 10000 Psi, CWP 15000 Psi.

 

For some hammer unions assembly, there are a bit different inside structure. Segment rings and springs are as parts of union assemblies.

 

PME Industrial also makes Viton Seal Ring for the repairs of hammer union for expand union's service life.  

 

All PME hammer unions hard parts are made by quality alloy steel like 35CrMo, AISI 4130 or other material as clients require. Wing nuts are heat treatment after forging, that is, quenching and tempering just like PME other premium flowline irons: integral pup joints, swivel joints and plug valves!

 

Hammer Union Wing Nuts

Segment and Spring

Viton Seal Ring

2" FIG 1502

 

Cell/WhatsApp: +86 138 1899 0736, Email: contact@pmeindustrial.com

 

We look forward to your reaching!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

PME Kelly Hoses 3-1-2 Inch WP 7500 Psi 75 FT Grade E for High Pressure Drilling Operations

PME Industrial Teams are under urgent production for the coming China's National Day Holiday.

 

We are completing the fabrication of oilfield hoses and high pressure flowlines efficiently to catch the shipment before the holiday.

Pressure testing, packing and shipping are going smoothly as PO issued by PME honored clients.

 

Below is PME high pressure kelly hose, also named cement hose, mud hose, for clients' shipping agent's collection.

 

Main Specification

Kelly Hose Grade E

Size: 3-1/5"

Working Pressure: 75000 Psi

Test Pressure: 11250 Psi

Ends: 4" FIG 1002 Male x Female

Length: 75 FT

 

To order high pressure Kelly hose certified by API 7K, please contact us as below!

Cell/WhatsApp: +86 138 1899 0736, Email: contact@pmeindustrial.com

We look forward to your reaching!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

What a Frac valves API 6A pressure rating 15000 Psi made of, plug valve, choke valve, check valve and gate valve?

PME Industrial supply high pressure flow iron figure 1502 such as 1502 flow iron integral pup joint, 1502 flow iron swivel joint, and 1502 hammer union.

 

For cementing, flow back and choke kill manifold, PME also design and produce iron treating valves for both standard service and sour gas service, including Plug Valves 2" x 2", 15000 Psi, FIG1502 Male x Female, 2" and 3" Adjustable Choke Valves, 2" check valves as standard size, and 2-9/16" or 3-1/16" for gate valves pressure rating 5000 Psi, 7500 Psi.

 

Normally ends with hammer wing union FIG 1502 male by female, PME frac treating iron valves are in 2 inch and 3 inch. Other sizes required by users are available. PME plug valves 2" FIG1502 are made of alloy steel after heat treatment with LOT numbers for each part, same as choke valves, check valves and gate valves.

 

All PME Industrial API 6A valves for choke kill manifold are specially heat treated and inspected for high level quality control. The manufacturing processes of plug valves, choke valves, check valves and gate valves include forging, heat treatment, testing pressure, blasting and painting. 

 

PME plug valves, adjustable and fixed choke valves, check valves and 4-1/16" API 6A 75000 Psi mud line gate valves as high pressure flow line are interchangeable with WECO and Chiksan.  Mill of Certificates, Testing Reports, NDT Reports and Original of Certificate attested by Chamber are delivered to users together with integral treating iron valves packages.

 

Flow Iron Valves, API 6A

Plug Valve 2" 15K FIG1502 MxF

Choke Valve 2" 15K FIG1502 MxF

Check Valve 2" 15K FIG1502 MxF

Gate Valve 3-1/16" 5000 Psi Flange

 

To order the valves certified by API 6A, please contact us as below!

Cell: +86 138 1899 0736, Email: contact@pmeindustrial.com

We're looking forward to your reaching!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

PME ofrece válvulas tapón, codos, tees para servicios de H2S o gas en presiones 10000 psi 15000 psi

 Las válvulas tapón integrales PME Industrial se realizan en tamaños de 2” FIG1502 15000 Psi de cementación, acidificación, fractura y otras líneas de alta presión.

 

PME produce codo largo radio 2" Fig 1502 15000 Psi M X F integral para servicio estándar y servicio H2S.

 

Las tes de unión PME están completamente diseñadas, producidas y probadas de acuerdo con los estándares API 6A y API 16C, connections MxMxF, FxMxF, FxMxM, MxMxM, FxFxF para una fácil conexión con varios equipos de cementación o fracturación NACE 0175.

 

Tees, 1", 2", FIG1502, 15K

Válvula de tapón, 2" FIG1502, 15K

Codo largo radio, 2" FIG1502, 15K

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Forjamento Pup Joint Integrais 2 inch 3 inch OEM China uniões figura 1502

A PME fornece pup joint integrais com a união do martelo 2 "e 3" FIG1502 macho x fêmea.

 

PME pup joint integrais 2 "e 3" é forjada em liga de aço 35CrMo ou AISI 4130 para serviço de H2S ou gás.

 

A pressão de trabalho da PME pup joint integrais 2 "e 3"varia de 6.000 a 20.000 psi. PME pup joint integrais 2 "e 3" FIG1502 pode ser até 15,000 psi. Existem diferentes comprimento para opções como 2 pés, 4 pés, 6 pés, 8 pés e 10 pés.

 

PME Pup Joint integrais

Tamanho: 2 ", 3"

Pressão: 15000 Psi

Conexão: FIG1502 macho x fêmea

 

PME também produzem válvulas tipo tampas, cotovelo chicksan modelo, FMC modelo Válvula de Esclusa, Adaptador Macho X Fêmea, Curva Raio Cotovelo, Derivação Lateral, WYE e acessórios integrais para fluidos e gás H2S a pressões de até 15000 psi de trabalho.

 

Ligue para a PME Industrial, você receberá uma resposta instantaneamente!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Bull Plug Male 2 Inch FIG 1502 1-2 Inch Port for H2S Sour Gas Service

PME Industrial is the China provider of 2" FIG1502 Flow Line Iron, including hammer union, bull plugs, adapters, flow control valves for high pressure fluid control during well testing, cementing and fracturing.

 

Bull plug male 2" FIG 1502 C/W 1/2" port NPT with wing nut can work both in standard service and H2S sour gas service. PME supply bull plug male and bull plug female as union connection for flow lines, using HS Code 84819090 to for importing and exporting customs clearance procedure.

 

All bull plug male and bull plug female PME made in China are packing in wooden or iron box good for shipping by air and ocean. PME bull plugs widely serve in domestic oil gas sector and oilfield maintenance in Qatar, United States and United Arab Emirates.

 

More Options for PME Bull Plugs

 

2" FIG602 Male Bull Plug with 1/2" NPT, WP 6000 Psi

2" FIG602 Female Bull Plug with 1/4" NPT, WP 6000 Psi

 

3" FIG1002 Male Bull Plug with 3/8" NPT, WP 10000 Psi

3" FIG1002 Female Bull Plug with 1/2" NPT, WP 10000 Psi

 

4" FIG1502 Male Bull Plug with 1/4" NPT, WP 15000 Psi

4" FIG1502 Female Bull Plug with 1/4" NPT, WP 15000 Psi

 

Call PME Industrial, you will get response instantly!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Stainless Steel 316 King Nipple Crimp Ferrule and Hammer Unions 4 Inch FIG 206

As being widely known, PME Industrial supply low pressure hoses assembly and high pressure drilling hoses like rotary hose and choke kill lines.

 

King combination nipples are used for low pressure discharge hoses and suction hoses for various drilling fluid and liquids. Material of these king nipples is SS 316 as oilfield end user requirements. It can come with hoses from 1/4" to 8" to meet different oil suction and discharge service. PME King Combination Nipples photos show the 4" 316 stainless steel NPT threaded end.

 

WECO hammer union is the important part as connection of high pressure hoses and Chiksan flowlines such as plug valve, swivel joint, integral pup joint and choke manifold. Apart of hammer unions FIG 206 FIG 1502 in alloy steel 35CrMo, A105, AISI 4130, AISI 4040, PME Industrial also produce Stainless Steel 316 Hammer Unions, SS304 and SS316L.

 

PME is also the manufacturer of SS 316 Ferrule fittings in China. We supply 316 Stainless Steel Tube Ferrule Fittings to United States, Indonesia, Portugal, Germany and Pakistan.

 

Stainless Steel 316 Tube Fittings Specification

Crimp Ferrule 4"

King Nipple 4" NPT

Hammer Union 4" FIG 206

Hammer Union 2" FIG1502

 

Any request about stainless steel 316 elbow with union ends, male connection, stainless steel tee male x male x female price list, cross union female x male x male x female, SS 316 adaptor specification. Call PME Industrial, you will get response instantly!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

What is the ground joint pipe union 1-2 inch FNPT 150 LBS ASME B16.3 A105 galvanized malleable iron?

 PME ground joints pipe union are also named pipe fittings, galvanized malleable iron in material ASTM A105.

 

The ground joints pipe unions made in China by PME Industrial conform to the dimensions and pressure rating of ASME 16.3.

 

PME forged ground joints comply with ASTM A105 female x female, and 150 LBS and Class 300 LBS working pressure. Available nominal sizes are 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2" and 3" in malleable iron black.

 

Pipe Union Specification

Nominal Size: 1/2"

Pressure Class: 150 LB

End A: 1/2" F NPT

End B: 1/2" F NPT

Material: ASTM A10

Standard: API 16C

Brand: PME Industrial

 

Dimensional information required for good prices.

Call PME at +86 138 1899 0736, WhatsApp Same!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

What is the difference of coflex hoses and choke kill hose lines?

PME Industrial coflex hoses are designed and manufactured as per API 16C standard, with API flanges and WECO type hammer unions.

 

General sizes of PME coflex hoses are in 2-1/2", 3", 3-1/2", 4" and 5" for drilling and well testing.

 

Choke and kill hose lines made in China are the high pressure flexible hoses with Stainless Steel Armored. PME choke kill hoses are also made in according with API 16C specs. Working pressure 5000 Psi, 7500 Psi, 10000 Psi and 15000 Psi are available for transfer oil, gas and other drilling medium during onshore productions.

 

Connection API flanges of PME coflex hoses and choke kill hose lines normally use 2-1/16" 10000 Psi, 3-1/8" 5000 Psi, 3-1/16" 10000 Psi, and 4-1/16" 15000 Psi.

 

PME coflex hoses and choke kill hose line serve same as high pressure flexible hoses for circulating drilling fluid with Max. length 30 meter (100 ft), for both standard service and h2s sour gas service.

 

Refer to PME Coflex Hose Specification and photos for order purpose.

Size: 2"

Working Pressure: 10000 Psi

Connection: 2" FIG 1502 MxF

Standard: API 16C

 

For oilfield high pressure hoses, PME Industrial also rotary vibration hoses API 7K certified and Blowout preventer hoses API 16D certified.

 

Call PME at +86 138 1899 0736, WhatsApp Same!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

China Stainless Steel 304 ANSI Class 300 Flanged Ball Valves 4 inch 2 pieces MIN WP 50 Bar

China valves manufactures PME Industrial design and produce 2 piece flanged ball valves with stainless steel as body material.

 

PME SS 304 ball valves sizes ranged from 1/2" (DN 15) to 4" (DN 100), such as options inside diameter 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" for multiple fluid control purposes.

 

PME stainless steel ball valves feature ANSI Class 150 # and ANSI 300 Class 300 #, end connection API Flanges.

 

Ball valves 4" ANSI 300# flanged shipped by Shanghai PME Industrial are being well served on oil and gas sector for last several months.

 

Thanks our clients' trust. Your valued feedback makes PME the amazing team.

 

Ball Valves

Size: 4"

Pressure: ANSI 300 #

Connection: Flange

Type: 2-Piece

Material: 304 SS Stainless Steel

 

For fluid control solutions, PME Industrial also supply plug valves (ie. 3" FIG 1502 Male x Female), parallel gate valves (ie. 2-9/16") , choke valves (3-1/16") , check valves (2" 105Mpa FIG602 Male x Female), safety valves and pressure relief valves. 

 

Call PME sales at +86 138 1899 0736, WhatsApp Same!

We're looking forward to the next request from yours!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

 

China Compressed Air Rubber Hose 1/2 in, Max 300 Psi, NPT Female Swivel Fittings, Yellow

 Function as Gates Flex 300 Psi multipurpose hoses, PME rubber hoses are suitable for compressed air service.

 

PME compressed air service rubber hoses feature flexible and reinforced structure.

 

Various inside diameter, like air hoses 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2" are for general oil and gas application.

 

Pressure ranges from 150 psi to 300 Psi and the hoses length can be made in 25 feet, 50 feet and 100 feet, customized by clients' request.

 

All rubber hoses are passed pressure tested and tagged with full set of mill of certificates and reports. PME also can offer Original of Certificate and Invoice Attested for PME clients customs clearance. 

 

PME Industrial complete the production for the new batch of air compressed air rubber hoses. Refer to the basic 300 Psi air hoses specification and photos below.

 

Air Hoses

Size: 1/2" x 1 meter

Working Pressure: 300 Psi

Ends: 1/2" NPT Female

Color: Yellow, Black

Manufacturer: PME Industrial

Made in China

 

For any inquiries, no hesitate to call PME sales at +86 138 1899 0736, WhatsApp Same!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Purchase High Pressure Hoses 4 inch CWP 10000 psi in FIG1003 Male x Female union ends from China.

 China FIG 1003 hammer unions are used widely as high pressure manifold connections. They are also can be assembled to API 7K high pressure hoses for cementing, fracturing, and other oilfield applications.

 

PME Industrial, the high pressure drilling hoses China manufacturers, supply various sizes from 2" to 6", pressure rating from 1500 Psi, 2000 Psi, 4000 Psi, 5000 Psi, 7500 Psi, 10000 Psi and 15000 Psi as API Spec 7K.

 

PME high pressure hoses can work as mud hose, Kelly hose and vibrator hose coupled with 4" FIG 1003 Male x Female. These hoses are well shipped to PME oil and gas service companies in South Asia, North America, and the Middle East.

 

As per scope of high pressure drilling hose requirement below, PME sales team will contact you to provide an accurate quotation!

 

High Pressure Hoses

Size: 4"

Working Pressure: 10,000 Psi

Ends: 4" FIG 1003 Male x Female

Length: 15 ft

 

Call PME Industrial Today!  WhatsApp: +86 138 1899 0736 

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com