NBR Hammer Union Lip Seals Lip Seal Garter Spring

In high-pressure fluid transfer operations, the integrity of your pipeline connections is non-negotiable.

 

PME specialized Hammer Union Ring Gasket Lip Seal Garter Spring is engineered to provide the most reliable, pressure-energized seal for critical flowline systems

 

Product Specifications and Features

 

PME seals are designed for the widely used Fig 602, Fig 1002, Fig 1502 series Hammer Union connection, a standard in the oil & gas, drilling, and manifold industries where high pressures are the norm.

 

Specification	Detail
Product Type	Hammer Union Ring Gasket / Lip Seal Garter Spring
Sizes Available	1”, 2”, 3”, 4”, 5”, 6”
Union Figure	FIG200, FIG206, FIG602, FIG1002, FIG1502, FIG2202
Material	NBR (Nitrile Butadiene Rubber/Buna-N)
Key Design Feature	Lip Seal with Garter Spring reinforcement
Application Suitability	High-pressure air, water, oil, gas, and mud service (up to 15,000 PSI NSCWP for Fig 1502 Unions)

 

Unrivaled Reliability in High-Pressure Environments

What sets our seal apart is the combination of a lip-type design and an internal Garter Spring. The lip seal is inherently pressure-energized; as system pressure increases, the lip is pushed against the mating surface, enhancing the seal. This mechanism provides a superior, self-adjusting seal that minimizes fluid flow turbulence and protects the metal-to-metal seating surface of the union.

 

The addition of the Garter Spring ensures consistent, radial sealing force, even at low pressures or when the elastomer may be subject to minor swelling or shrinkage, leading to extended service life and reduced maintenance frequency.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

1502 Integral Fittings Cushion Tee Flowline Products interchangeable with FMC Chiksan China Factory

Cushion Tees function as frac tees with integral union ends female and male. 1502 integral fittings require 15000 Psi for standard service and 10000 psi NACE sour gas application.  

 

PME flow products fabricate union cushion tees from high strength forged alloy steel. Two, three and four inches cushion tees are in multiple Figure FIG 602, FIG 1002, FIG 1502 to suit as a variety of pressure rating.

 

Picture below is just the sample of 4" FIG 602 Cushion Tee PME supply flowback iron to our clients for flowback service.

 

Technical Specification:

Cushion Tee

Size: 4"

Ends: 4" FIG 602

Configuration: Female x Male x Female

CWP: 6000 Psi

Service: Standard

 

PME Industrial offer integral fittings as Tees, Block ELLs, Laterals, Crossovers, and Long Sweep 90, 45 degree integral with hammer union ends male and female.

 

All technical documentation as MTRs, Test Reports and NDT reports are available for no additional cost. PME also take the third party inspection like SGS and DNV to assure the quality of high pressure for acidizing, fracturing and well testing.

 

Cell/WhatsApp: +86 138 1899 0736, Email: contact@pmeindustrial.com

 

PME 2", 3", 4" Cushion Tee

2", 3", 4", FIG 602 MxFxF, 6000 Psi

2", 3", 4", FIG 602 MxFxF, 6000 Psi

2", 3", 4", FIG 1002 MxFxF, 10000 Psi

2", 3", 4", FIG 1002 MxFxF, 10000 Psi

2", 3", 4", FIG 1502 MxFxF, 15000 Psi

2", 3", 4", FIG 1502 MxFxF, 15000 Psi

 

We look forward to your reaching!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Integral Pup Joint 2 Inch 3 Inch FIG 1502 Hammer Union Testing

PME technical dept. is testing integral pup joint union ends by assembling original hammer union from PME clients. 

Integral Pup Joint, 2" and 3", Hammer Union FIG1502. 

Testing result is compatible and completely matched. 

For more details, WhatsApp: +86 138 1899 0736. 

Shanghai PME Industrial Co., Ltd. 

Tel: +86-21-58372350 

Cell: +86 138 1899 0736 

Email: contact@pmeindustrial.com 

Site: www.pmeindustrial.com

Integral Pup Joints 2 1502 Sour H2S Service Supplier in China

PME integral pup joints are made in China in quality alloy steel like 35CrMo, 4130 as clients required. 

As integral flow equipment supplier in China, Shanghai PME Industrial offer integral and NPST straight pipe, also named pup joint ends with 2", 3", 4", 602, 1002 and 1502, male x female, working pressure up to 20000 psi. 

PME Industrial integral pup joint can be used in oilfield standard service and sour gas (H2S) service. As a part of high pressure manifolds, Shanghai PME high pressure flow iron function well as FMC Chiksan pup joint FIG1502, FIG602, SPM flow control products 2" & 3" 1502, and WECO fittings and pup joints.  

If you have request for the following items, including but unlimited, please contact PME by EMAIL: contact@pmeindustrial.com, or CALL US TODAY: +8613818990736

PME Industrial 3 inch pup joint 1502, 5 ft, Pressure rating: 10000 psi, Sour Service, 3" 1502 WECO Connection

PME Industrial 3 inch pup joint 1502, 10 ft, Pressure rating: 10000 psi, Sour Service, 3" 1502 WECO Connection

PME Industrial 3 inch pup joint 1002, 5 ft, Pressure rating: 7500 psi, Sour Service, 3" 1002 WECO Connection

PME Industrial 3 inch pup joint 1002, 10 ft, Pressure rating: 7500 psi, Sour Service. 3" 1002 WECO Connection

PME Industrial Pup Joint 1" Lengths 0.5 M with 1" FIG 1502 Union Connections (M/F) Welded, Standard Service

PME Industrial Pup Joint 1" Lengths 1 M with 1" FIG 1502 Union Connections (M/F) Welded, Standard Service

PME Industrial Pup Joint 1" Lengths 3 M with 1" FIG 1502 Union Connections (M/F) Welded, Standard Service

Pup Joint 2" FIG 1502 Male x Female, Integral, 10 Feet Long, STD Sour Service, 15000 Psi CWP, AISI 4130

Worldwide stockist, distributor, oilfield service contract, trade agent for high pressure flow equipment supply are welcomed to send RFQ.  PME Industrial Sales Team offer you quotation with best price, delivery time and sample necessary test certificate of integral pup joints.

PME proposal with estimated shipping cost in CIF price will be offered for your reference. 

Whatsapp: +8613818990736

Shanghai PME Industrial Co., Ltd. 

Tel: +86 21 5837 2350

Cell: +86 138 1899 0736

Email: contact@pmeindustrial.com

For More Flowline Equipment: www.pmeindustrial.com

PME Choke & Kill Hose H2S 3 ID x 75 FT 15K WP Armour Steel

What size are PME choke and kill hose lines?  ID: 3 Inch

What about the working pressure & test pressure? WP 15000 Psi, TP 22500 Psi

What the connection ends of choke & kill hose? PME Industrial Hammer Unions 4 FIG 1502 male x female

Which API standard of choke kill hoses PME supply? API 16C Monogrammed

What about the inner layer of coflex hose? Choke kill hoses sample photo here.

Does this choke kill hose have H2S Service option? Yes, PME API 16C hose have two options: standard service and h2S Sour service!

What about the minimum bend radius of PME Industrial choke kill hoses? 1200mm

For more technical questions, please reach us by:

Whatsapp: +8613818990736

International Sales Team

Shanghai PME Industrial Co., Ltd.

Tel: +86-21-58372350

Cell: +86-13818990736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Integral Pup Joints Flowline Figure 1502 Standard & Sour Gas Service

PME Integral Pup Joints on wellhead equipment are manufactured from high quality alloy steel, available in 2" and 3" size, working pressure up to 20000 Psi. Our oilfield service companies clients buy pup joint from PME with HS code 8424909090 for oil field equipment purpose onshore and offshore operation. 

Like PME other flowline products, PME integral fittings and pup joints are designed and manufactured as API standard, for transporting high pressure fluid with unions connections in choke and kill manifold, well testing, flow line, fluid control, flow back and cementing applications. 

Connection of PME Integral Pup Joints  are Hammer Weco Unions, enable to make-up and break-out of temporary flow lines more faster and easier. Unions figures 1502, FIG602 and others as operation demand. 

As high pressure flow line pipes, PME supply integral pup joints assembly 2 fig 1502 m x f unions end, 2 inch FIG1502 pup joints NPST 10 ft, standard, butt weld pup joints x-overs 1502, 15000 Psi, 1ft, 5ft, 10 ft and 15ft, PME pup joint Ass.hose 3 inch npst alloy steel Fig. 

For more technical information and inquiries about PME Industrial Pup Joint Assembly Hose 2 Integral, you're welcomed to contact with our sales team. 

Whatsapp: +8613818990736

Email us: contact@pmeindustrial.com

Cell: +86 138 1899 0736

Tel: +86 21 5837 2350

Web: www.pmeindustrial.com

Shanghai PME Industrial Co., Ltd. 

Integral Fittings, Tees, Elbows, 2" & 3", FIG1502, 15,000 Psi

Shanghai PME Industrial Co., Ltd is leading manufacturer and supplier of Flowline Control Products. 

Our high pressure integral fittings are exchangeable with FMC, SPM, SJ Petro, and made with forged alloy steel high quality materials, which are suitable for standard sevice and sour gas H2S Service. 

PME flowline Chiksan fittings are test for 15000 Psi working pressure, sizes in 2 inch and 3 inch  2" & 3" on elbows, tees, and crosses. 

Integral Fittings Designed and Manufactured by Shanghai PME Industrial Co., Ltd, technical specification as below. 

2" & 3" FIG 1502, M x F x F, 15000 Psi PME Tees

2" & 3" FIG 1502, M x F x M, 15000 Psi PME Tees

2" & 3" FIG 1502, M x M x F, 15000 Psi PME Tees

2" & 3" FIG 1502, M x M x M, 15000 Psi PME Tees

2" & 3" FIG 1502, F x M x M, 15000 Psi PME Tees

2" & 3" FIG 1502, F x M x M, 15000 Psi PME Tees

2" & 3" FIG 1502, F x F x F, 15000 Psi PME Tees

2" & 3" FIG 1502, M x F x M, 15000 Psi PME Tees

2", FIG 1502, M x F, 15000 Psi PME Long Radius Elbows

3", FIG 1502, M x F, 15000 Psi PME Long Radius Elbows

2", FIG 1502, M x F, 15000 Psi PME Short Radius Elbows

3", FIG 1502, M x F, 15000 Psi PME Short Radius Elbows

For more information of PME Integral Fittings, Elbows, Tees, Crosses, no hesitate to contact our profession sales team. 

Sales Dept. 

Cell (7*24): +86 138 1899 0736

Tel: +86 21 5837 2350

Email: contact@pmeindustrial.com 

Shanghai PME Industrial Co., Ltd.