Find Price for Hose Choke and Kill 2 Inch 2-1-16 IN API 6A Flange 5000 psi H2S 50 ft SS Armored

Which API Specification verify choke and kill flexible hose line? The coflex type stainless steel hoses are manufactured in accordance with API 16C.

 

PME flexible choke kill hose lines are used for conveying the fluid to control oil gas well pressure. The hoses connect the BOP stock to choke manifold.

 

All the coflexip style hoses are suitable for the standard service and H2S Sour Gas Service as important part in choke and kill system. To secure the hoses, PME provide safety clamp with chain and shackle and lifting collar on each flange end.

 

As well test hoses manufacturer, PME 2" choke and kill hose are crimped with 2-1/16" API 6A flange 5000 psi rated C/W INCONEL 625 Inlay Ring Groove. Both hose body and coupling are suitable for sour service in compliance with NACE MR 0175.

 

PME Hose Choke and Kill ID 2", with connection 2-1-16"  API 6A Flange 5000 psi H2S 50 Feet SS Armored features in working pressure 5000 psi, test pressure 7500 Psl Flexible Specification Level can be up to FLS 3.

 

The design and fabrication of BOP choke and kill hose line are as standard API Spec 16C Monogrammed and fire resistance of +700⁰C for 30 mins.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

What is LB in fixed swivel flange and 900 LB and 1500 LB rating flanges are the same

PME flange is connecting solution for the oil and gas piping, valve, pumps and other equipment as pipe work as welded type and threaded.

 

Conforming American National Standards ASME ANSI B16.5, PME flange features Class 150 LB, Class 300 LB, Class 400 LB, Class 600 LB, Class 900 LB, Class 1500 LB and Class 2500 LB as flange pressure class rating.

 

Normal pipe size is from 1/2" to 24". As API Flanges manufacturer, PME can custom flanges as clients' specification in raw material carbon steel and stainless steel.

 

To choose the suitable PME flanges, consider several factors about pressure class rated as below.

 

Factor 1: Max. Working Pressure the flanges will be operated?

Factor 2: Max. Temperature the flanges serve for?

Factor 3: Raw Material the flanges should be fabricated?

 

To specify the size, pressure rating and QTY, PME team response good flange offer and shortest lead time. Or just share your details requirement as the three factors, PME will come with the best solution for your flanges demand. 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Unión de Golpe Fig 1502 2 Inch Roscada Proveedor de China

 Las uniones de martillo de 2" FIG1502 se utilizan para conectar rápidamente tuberías y conjuntos de mangueras flexibles para transportar aire, agua y cemento en la industria del petróleo y el gas.

 

PME ofrece una amplia gama de uniones de martillo para servicios de gas estándar y agrio. Todas las uniones de martillo están hechas de material de aleación de calidad para garantizar un servicio confiable en tierra y en alta mar.

 

Unión de Golpe Fig 1502 2 Inch es Diámetros 2" and Presión de trabajo 15000 Psi. Existen dos tipos, roscar y soldar en SCH. XXH.

 

Las uniones de martillo de alta presión FIG 1502 se utilizan en líneas de cementación, acidificación.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

What is a BOP control line fireproof and the PSI hose fire fighter working pressure rated

 

PME stainless steel armored hoses are flame resistance for hydraulic application. The BOP control line provide the flexible connection for blowout preventer system during the well control operation.

 

All PME fire fighter BOP hose assemblies are designed and tested as API 16D standards, American Petroleum Industry with stand the fire, high temperature and high pressure.

 

Fire proof BOP control hose assemblies are over ferruled with stainless steel armor as fireshield protection. The hoses convey hydraulic power constantly to the surface BOP control unit.

 

PME-16D-1IN-UN-15SS and PME-16D-1IN-UN-25SS features pressure rating 5000 Psi, 35 MPa with inside diameter 1". The hose connections crimped with thread by quickly installing hammer union ends.

 

Max. WP 3000 Psi PME produce are also available for customer's API 16D control systems for drilling well control equipment application. .

 

Hose Fire Fighter, BOP Control Line

Size: 1"

Working Pressure: 5000 Psi

Union Ends: 1" FIG602 MxF

Length: 15 Feet, 25 Feet

SS Armored: Yes

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Chiksan Type Flow Line Iron Welded 3 Inch CWP 2000 Psi Figure 206 for Low Pressure Oil Gas Service Distributor

 

PME Chiksan Type flowline treating irons can be fabricated in integral fittings for high pressure application and welded type for low pressure oil and gas service.

 

High pressure Chiksan type flowline irons are up to working CWP (Psi) 6000, 10000 and 15000 with union ends Figure 602MxF, FIG 1002 MxF or FIG1502 MxF configuration.

 

The size of high pressure flowline irons packages can be changed as PME customer's requirements. PME provide Chiksan flowlines for high pressure or low pressure equipment for manifold, mud tank, fracturing and aciding.

 

PME API 16C Low pressure Chiksan pipe work are welding forged, rated at 2000 psi for 2", 3" and 4" ID flowline packages.

 

Partial Chiksan Type Flowline Iron Photo of PME Supplies

 

Data Header 3" FIG206 MxF

 

Elbow 3" FIG206 MXF

 

Tee 3" FIG206 FxMx, FxMxF

 

Union Crossover 3" FIG1502 x FIG206 MxF

 

All material can be supplied by PME Industrial as standard and H2S Sour Service. For more requirement, Target Tees, Double Cushion 90 , Ells, Cross, And Integral 45 Degree Elbow, find PME as your best partner for oilfield work.

 

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

What diameter is rotary vibrator assembly and how long drilling hose as maximum length

PME Normal ID 2-1/2", 3", 3-1/2" and 4" rotary vibrator hoses come with safety clamps, hose lifting collar and sling.

 

Looking for rotary hose assembly Grade D for oil field services and supplies, please provide the dimension, connection and length.

 

Maximum length would be 100 ft (30 meters). PME Team can produce longer API 7K mud hoses assembly for local drilling contactors' operation.

 

Fittings for PME rotary vibrator assembly are hammer union male sub and nut, female sub, hubs and API flanges.

 

PME focus on quality high pressure rotary hose and mud hose. Each hose assembly is fabricated and inspected as API 7K standard for both standard and sour gas service.

 

Full set of mill of certificates only can be issued upon deeply inspection, including, not limited to, hydrostatic test for test pressure, compliance certificate and hose coupling material certificate.

 

For technical requirement rotary hoses PME-ASSY-3-1-2IN-WP5K-API7K, kindly contact email PME team by email contact@pmeindustrial.com or WhatsApp +86 138 1899 0736 for quick answer.

 

Rotary Hose / Mud Hose, 3-1/2", WP 5000 Psi, TP 7500 Psi, Butt Welded Union Ends 4" FIG1002 Male x Female, Long 60 Feet as per photo below, with delivery fluid water based or oil based sully, stainless steel armor is available. Package good by sea freight is iron box or plywood box.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

What is the difference about hammer union FIG206 between threaded and butt welded

 

Hammer unions function as the connection for flexible rubber hoses and hard iron pipelines. The sizes as 2", 3", 4", etc. stand for the standard pipeline diameter.

 

Speaking about the Figure when you quote or purchase the hammer union, there are 3 or 4 number, like FIG100, FIG206, FIG602, FIG1002 and FIG1502.

 

The first or first two numbers mean working pressure. FIG206 stands for working pressure 2000 Psi, whick FIG1502 working pressure 15000 Psi. The last two numbers 00, 02, 03 is for the type of surface and surface seal.

 

For high pressure manifold, FIG1002, FIG1003, and FIG1502 are mostly demanded. And the low pressure application, FIG100 and FIG206 are good option. The connection type of PME hammer unions can be classify by threaded type and butter welded type.

 

PME FIG200 / FIG206 Hammer Union Butt Welded Features

a)         NSCWP 2000 Psi, Test Pressure 3000 Psi

b)        Male Sub and Female Sub in Grey, Wing Nut in Blue

c)         Butt Welded SCH40, SCH80

d)        Widely used for low pressure kill manifold or the middle pressure with air, water, oil or gas

e)         Serve for Standard Service and H2S Sour Service

f)          Application Cementing, Fracturing, Aciding, Testing and Choke Kill Pipelines

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

PME Hose Hobbles Clamps with Wire Rope Cable and Pipe Safety Restrains for Oilfield Safety Solution

PME Hose hobble clamps are used for securing high pressure drilling hoses like slurry hoses, frac hoses and choke kill hoses for oil and gas service.

 

The hose hobble clamps consist of two clamps and wire rope cable. Please specify the outer diameter of hoses assembly or pipelines FIG 1502.

 

PME hose hobble clamps adopt 2 bolts hobble clamps and wire rope cable or chain with various sizes for securing the hoses and piping. It's easy to install and remove.

 

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

 

PME Rotary Hoses 3.5 Inch Grade D Pressure Rated 5000 Psi Ends 4 Inch FIG 1502 with Safety Chain Clamps

PME 3-1/2" API Grade D Rotary Vibrator Hoses are pressure rated in WP 5000 Psi, TP 7500 Psi with or without Stainless Steel Armored.

 

The 3-1/2" Grade D hoses serve for oil and gas drilling with 4" FIG 1002 Hammer Union Male Sub with Nut and Female Sub. Safety chain clamps for both ends to secure the hose for more safe operation. API Flanges and NPT Thread can be equipped to connect various oilfield equipment.

 

PME Grade D Rotary Vibrator hoses are also named drilling hoses, cement hoses as they are used for oilfield drilling, cementing, bumping mud. The fluid medium can be water based mud, oil based mud under high pressure application.

For more high pressure drilling hoses certified by API 7K Standard as below technical specification, contact PME sales team today!

 

Email: contact@pmeindustrial.com, Cell/WhatsApp: +86 138 1899 0736

 

Rotary hoses 4" Grade E WP 7500Psi China Supplier PME Industrial provide high pressure drilling hoses for years

4" ID, 75 Ft., 5000 psi, C/W Fig 1002 Union, PME Industrial Rotary Drilling Hose

5", 7.5K China mud rotary hose x 23.27 mtr c/w 6" fig 1002 female sub one end and PME Industrial 6"1002 male sub/nut other end

6" ID X 10 feet PME rotary hose for h2s application wp: 2000 psi , crimped with 6" hammer union male and female sub

Mud Vibratory Hose, 4" ID, WP: 7500psi ends 5" Fig 1002 MxF, Length: 10ft, Supplied by Shanghai PME Industrial with Safety Clamp API 7K

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com