Chiksan Type Piping 2 Inch WP 15000 Psi FIG 1502

Chiksan type piping is high pressure fluid control products as flowline pipe or integral pup joints. They'are widely used cementing, fracturing and well testing. 

PME flowline pipes in Chiksan type are forged with quality alloy steel, with full set QA certificates like MT, UT, raw material certificates EN 10204 3.1, and test pressure reports. 

PME are shipping Chiksan type pup joint 2" FIG1502 to oilfield supply clients as below photo. 

Product Name: Integral Pup Joint 2" FIG1502

Material: Forged Alloy Steel 4130, 35CrMo. 

Connection: 1502 Hammer Union

Size: 2"

Pressure: 15000 Psi

Length: 1' to 12'

Standard: API 16C

PME Sales Team 

Tel: +86 21 5837 2350

Cell: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com 

Lapa Wells, Oil World

HOUSTON - O objetivo da petroleira francesa é ampliar a produção do campo no pré-sal da Bacia de Santos.

Prevista este ano, a nova campanha de desenvolvimento da Lapa no pré-sal da Bacia de Santos incluirá a perfuração de quatro poços no campo, disse a Total à BE Petróleo. Segundo a empresa, as obras permitirão aumentar a produção do ativo com segurança.

O Campo da Lapa agora produz aproximadamente 24.000 bopd de dois poços produtores conectados ao FPSO Cidade de Caraguatatuba. O volume é 40% menor do que o extraído em janeiro de 2018, quando a Total assumiu a operação de campo, após negociar com a Petrobras.

Na semana passada, a petroleira francesa concluiu uma campanha de intervenção em um dos poços da Lapa do LPA-1D. Iniciada em fevereiro, a obra consistiu em tamponar o poço, isolar o reservatório de superfície e instalar equipamentos subaquáticos (manifold e treecap).

Conforme relatado pela BE Petróleo, o LPA-1D tinha uma inclinação acima do fundo do mar devido ao desacoplamento dos alojamentos de baixa e alta pressão. Embora a inclinação não comprometesse as barreiras de segurança, a petroleira decidiu interromper a produção do poço antes de abandoná-lo permanentemente.

"A Total trabalhou com as autoridades competentes e seus parceiros no consórcio Lapa para realizar essa intervenção de maneira bem-sucedida", afirmou a empresa.

Como medida preventiva, a ANP autorizou o desligamento dos poços injetores, a fim de evitar o aumento da pressão no poço durante a intervenção. Segundo a agência, esses poços já começaram a operar novamente.

O LPA-1D será um dos dois poços que a Total abandonará na Lapa. O plano da petroleira é abandonar a primeira - que já teve uma vida útil prevista para terminar este ano, segundo estudos de corrosão elaborados pela Petrobras (ex-operadora do ativo) - em setembro.

O consórcio da Lapa compreende a Total (35%), Shell (30%), Repsol-Sinopec (25%) e Petrobras (10%).

HOUSTON -- The objective of the French oil company is to expand the production of the field in the pre-salt of the Santos Basin.

Scheduled this year, Lapa's new development campaign in the Santos Basin pre-salt will include drilling four wells in the field, Total told BE Petróleo. According to the company, the works will allow to increase the production of the asset with security.

Campo de Lapa now produces approximately 24,000 bopd from two producing wells connected to the FPSO Cidade de Caraguatatuba. The volume is 40% lower than the one extracted in January 2018, when Total took over the field operation, after negotiating with Petrobras.

Last week, the French oil company completed an intervention campaign in one of the LPA-1D's Lapa wells. Initiated in February, the works consisted in buffering the well, isolating the surface reservoir, and installing underwater equipment (manifold and treecap).

As reported by BE Petróleo, the LPA-1D had a slope above the seabed due to the decoupling of the low and high pressure housings. Although the slope did not compromise safety barriers, the oil company decided to stop the production of the well before abandoning it permanently.

"Total worked with the competent authorities and its partners in the Lapa consortium to carry out this intervention in a successful way," the company said.

As a preventive measure, the ANP had authorized the shutdown of the injector wells in order to avoid increase of pressure in the well during the intervention. According to the agency, these wells have already started to operate again.

The LPA-1D will be one of two wells that Total will abandon in Lapa. The oil company's plan is to abandon the former - which already had a useful life expected to end this year, according to studies of corrosion prepared by Petrobras (former operator of the asset) - in September.

The Lapa consortium comprises Total (35%), Shell (30%), Repsol-Sinopec (25%) and Petrobras (10%).

PME API 6A API 16A Hammer Union Adapters

PME Industrial design and make API 6A Weco Adapter Union Flange Reducer. 

Visit: PME Crossover Adapter

Adapter Flanges PME manufacture are in all sizes and pressure ratings. 

Popluar PME Industrial Union Flange Adapaters are double studded adapter flanges, companion flanges, flange x weco union adapters. 

PME Adapter Flange x Weco Union,  9/19"10 M x 3" FIG1502 Female, API 6A Certified

PME Adapter Flange x Weco Union, 4" 1500 x Weco 4" FIG602 Female, API 6A Certified. 

PME Adapter Flange x Weco Union, 4" 1500 x Weco 2" FIG602 Female, API 6A Certified. 

Whatsapp: +8613818990736

PME Adapter Flange x HUB, 11" 5000Psi Flange x 11" 5000 Psi HUB

PME Adapter Flange 5 1/8" x 3" FIG1502 Hammer Union Female

Crossover PME Industrial  Flange 4"  x Hammer Union 2" FIG1502 Female End

Crossover Adapter Flange 6" 600LB x4" Weco Union FIG602 Female PME Made

Crossover Adapter Weco Union 3" FIG 1502 Female x 2" FIG 1502 Male PME Industrial

Weco Flange 2 1/16" 5,000Psi x 2" FIG1502 Male, API 6A Certified


Pressure 2000Psi to 15000Psi

Service: Standard & H2S

Shanghai PME Industrial Co., Ltd.

Email: contact@pmeindustrial.com

Tel: +862158372350

Cell: +8613818990736

Site: www.pmeindustrial.com