API 7K Kelly Hose API 16D Fire Proof Flexible Hose SS Armored Datasheet and Test Certificate

BOP Control Hose can be designed as working pressure 3000 psi and working pressure rated 6000 psi. For the details as below. 1" fire proof flexible hose working pressure 6000 psi length 58 feet with JIC quick coupling or 1' NPT Male, or 1" or 1-1/4" BOP hydraulic hose 3000 Psi Pressure with 90 degree swivel joint.

High Pressure drilling hoses with API 7K are in working pressure 5000 Psi which is classed in Grade D. The hoses body is fabricated by NBR reinforced with textile layer with steel spiral. The hoses come with full set of COC and hydrostatic test.

Fire Proof Flexible Hose, API 16D 1" x 6000 Psi, Ends 1" NPT Thread

Kelly Hose, API 7K 2" x 5000 Psi, Ends 2" FIG1502 MxF

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Get Your 2" FIG1502 DR 150 Plug Valves from Trusted China Manufacturer Order Now!

PME Industrial supply various plug valves in manual plug valve, Pneumatic valve plug and 3" x 3" gear operated valvula tipo plug, available in 1 inch, 2 inch and 3 inch.

 

As trusted API 6A flow control valve China manufacturer, PME válvula plug can be interchangeable with FMC ULT plug vakve, MSI plug valve and SPM plug valve, with union ends and API flanges ends for easy connection.

 

PME low torque plug valve can serve under standard service working pressure up to 15000 Psi and H2S Sour Gas service WP 10000 Psi as API 6A design specification and NACE MR 01-75.

 

To control high pressure fluid during the choke kill manifold and fracturing operation, PME plug valves features low torque and easy maintenance. Plug valve redress kit full set and min. are economical option for PME client to save purchase cost and oilfield operation cost without removing and replace the plug valve assembly entirely.

 

PME low torque valves are widely exported and served on wellhead manifold flow control for oil and gas application in Europe, Africa, Middle East, East South, Australia, North America and South America.

 

DR 150 Plug Valve, Low Torque, 2" FIG1502 MxF, 105 MPa

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com 

BOP Control Unit Coflex Hose 1 Inch 5000 Psi Heavy Duty SS Armor Ends NPT Male 45 FT

PME BOP control unit armored hoses are fabricated from synthetic rubber with stainless steel armor cover.

 

The firefighter BOP hose body feature high tensile steel wire spiral layers as reinforcement and fire protection.

 

The BOP coflex hoses are designed and produced as API 16D, and complete with COC, Test Report and pressure chart with unique serial number for tracking.

 

Most coflex hoses are crimped with hammer union ends 1" FIG602 ML x FM, or 1" NPT Male Thread. While PME Industrial BOP hoses can come with high pressure self-sealing quick connection.

 

Hose Firefighter BOP

ID: 1"

Working Pressure: 5000 Psi

Test Pressure: 7500 Psi

Ends: NPT Male, Hammer Union 602 ML x FM

Length ( Max. ): 30 meters

 

For more options about BOP armored hoses, please send details request. We'll response you with good offer quickly.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

FMC Chiksan Style Flow Back Irons 2 Inch FIG1502 Plug Valve Check Valve Dart Swivel Joint WP 15K Standard Service

New batch of FMC Chiksan Style Flow Irons Valves and Swivel Joints are shipped to PME Industrial Client.

 

These materials, those are, low torque plug valves, dart type check valve and long sweep swivel joints, feature inside diameter 2 inch, working pressure up to 15000 psi and weco union ends 2" FIG1502 male with wing nut and female sub.

 

PME plug valves function same as FMC SPME Style valves with 2" FIG1502 Female x Male 15000Psi for standard service and WP 10000Psi for H2S Sour Gas Service. The Repair kit for plug valves is also available.

 

We can manufacture and supply two types of check valves, flapper check valves and dart check valves.

 

PME supply the repair kit 2" for swivel joint 2" long radius style 50 MxF. The repair kit can extend the service life LR-15 S/50 swivel joint, and further save user's production cost for oil well service.

 

For other FMC Chiksan style Flow Iron as below list, please send RFQ to PME team. We'll quote the best price and shortest lead time.

 

Integral Pup Joint 2" FIG 1502 MxF Union Ends, 2 feet, 4 feet, 8 feet, Sour Service, WP 10000 Psi

Cushion Tees 2" FIG1502 MxFxF, 2" FIG 1502 FxMxF, Sour Service, WP 10000 Psi

Integral Crossover (Union Ends Adaptor) 2" FIG1502 MxM, 2" FIG1502 FxF, Sour Service, WP 10000 Psi

Hammer Union Test Plug 2" FIG 1502 M C/W 1/2" NPT, 2" FIG1502 Male Ends with Wing Nut

Target Elbow, 2" FIG 1502 Male x Female, Sour Service, WP 10000 Psi

Choke Valve Adjustable 2" FIG1502 MxF with Stem and Seat for 10K H2S Service

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

90 DEG Long Radius Elbow 2 SCH XXS Sour Service NACE MR-01-75

PME elbows are classified into long radius and short radius in 90 degree and 45 degree as butt welded fittings.

 

Find the dimensions of PME butt welded elbows for 45 degree and 90 degree LR, normal pipe size is in 1/2", 1", 2", 2-1/2", 3", 4" and up to 8".

 

The center to face distance for PME long radius elbow is standard and shares same type with other brand.

 

Material for PME long radius elbow 2" SCH XXS is AISI 4130. And the long radius elbows are for sour gas service and meet NACE MR-01-75.

 

PME 2 Inch Schedule XXS elbows 90 degree long radius are welded for usage for piping line needs.

 

For long radius 90 degree elbow dimensions, freely contact PME team.

 

Shanghai PME Industrial Co., Ltd.

Cell / WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Heavy Duty Access Mat

 PME heavy duty access mats are designed as anti-slip access solution while providing ground protection for the heavy vehicles. The heavy duty access mats made from polyethylene are able to withstand 150 tons heavy vehicle. PME heavy duty access mates are reusable, which greatly reduce the road hardening time and improve production efficiency.

 

Thickness≥50 mm, withstand 150 Tons Vehicle

Thickness≥30 mm, withstand 80 Tons Vehicle

Thickness≥12 mm, withstand 20 Tons Vehicle

 

The heavy duty access mats are tough and durable, and carry extra-heavy vehicles. The mats are not easily deformed or damaged, which ensures the safety and stability of the road.

 

The heavy duty access mats are connected by metal rods, which are safe and reliable. The mats can be quickly laid into a temporary road to meet the needs of emergency construction or temporary traffic.

 

What is the pressure rating of the vibrator hose with flangs end Grade E as API 7K specification

API 7K Grade E, Rotary Vibrator Hose, 3" ID x 6 meter, 12 meter Over Length Features:

 

End A: API Flange 4-1/16" WP 5000 Psi

End B: API Flange 4-1/16" WP 5000 Psi

External Armored Protection: No, but Stainless Steel Armor Cover for Option

Maximum Working Pressure: 7500 Psi

Test Pressure: 11250 Psi

Standards: API Spec 7K 6th Edition

Hoses come with Hydrostatic Pressure Test Certification and Pressure Chart Recorder

Material Certificate for Flanged Ends, NDT Inspection Reports and Quality Certificate

 

PME Grade E hoses are provided with safety clamps & Slings from both sides and full set of quality certificate for each hoses with unique serial number for good tracking.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com 

FMC Chiksan 1502 Iron Product Line Block Elbow and Long sweep 90 Degree Elbow 2" Figure 1502 Male Female Difference

 What's the difference between the block elbow 2" FIG1502 and long sweep 90 Degree elbow?

 

The two elbows can be in same union ends like 2" FIG1502 MxF, 2" FIG1502 MxM, 2" FIG1502 FxF. These hammer unions ends are available for the well service equipment with the inlet or outlet sharing the same union Figure. If the connections don't match, PME also offer the solution by crossover for various size, figure for hammer union and the API flanges.

 

Longsweep 90 Deg. elbow is widely used in fracking and flowback application. PME supply 2" and 3" for clients purchase, other sizes are also available. The Figure 1502 connection with male and female ends are interchangeable with most well know brand like FMC Chiksan and WECO.

 

Flow iron block elbow is also well known as cushion type elbow or target type. It's in CWP 15000 Psi for acid and fracturing, well testing and flowback service. The standard is API 16C. PME block elbow 2" FIG1502 MxF H2S sour gas service meet NACE-01-75.

 

Block Elbow, 2" FIG1502 MxF

90 Deg Elbow, 2" FIG1502 MxF

Flange Union, 2-1/16" x 2" FIG1502 F

Pup Joint SCH80, 2" FIG1502 MxF, 500mm

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

BOP Hydraulic Hose Fire Resistant Red Cover API 16D NPT Male JIC Fittings

PME 35MPa Hydraulic fire resistant hoses are designed and assembled as API 16D as blowout preventer control hoses.

The BOP hoses can be used in Blow-out Preventer System and the application at risk of fire for well control equipment in petroleum industry from 1/4" to 2", pressure rated 3000 Psi and 5000 Psi for options.

 

PME high pressure fire-resistant hoses are inspected by third party by inspection equipment like electrical pressure test pump and fire testing furnace.

 

The inspection is carried on the basis of API 16D Specifications for control systems for drilling well control equipment and control systems for diverter equipment.

 

The objective of fire resistance test confirms the API 16D Clause 10.1.2. The fire resistance report includes pressure curve, temperature curve, photos of fire resistance test and the related equipment.

 

BOP Hydraulic Hose, Fire Resistant, Red Cover

Size: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"

Working Pressure: 3000 Psi, 5000 Psi Pressure Rating

Connection: NPT Male, Hammer Unions MxF, JIC quick coupling, etc.

Max. Length: 100 meters

Hose Body Color: Red for easy identification

 

For more infos about PME flexible fire resistant hose assemblies according API 16D, PME is here for you 24 hours a day, 7 days a week!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

 

Adjustable Choke Valve with 2 Inch Angle Flanges Rated Working Pressure 2500 LB Sour Service

 Hammer unions ends are usually as the valves connection for the adjustable choke. These choke valves are used to control the production rate by connecting with the drilling rig equipment which are in hammer unions ends too.

 

PME can design and produce the adjustable choke valve with angle flanged, that is, API flanges. PME angle type manual choke valves features in angle. Take the choke valve photo for example, the valves are sized in 2", and working pressure up to 2500 LB.

 

PME angle flanged choke valve are fabricated with main component like valve body, choke valve bonnet, valve seat, O-ring seal, hand wheel, etc. As major valves for choke manifold and wellhead Christmas trees, PME adjustable choke can serve for standard service an H2S sour gas service.

 

Besides of angle flange choke valve, we also supply high pressure needle choke valve and positive choke for oil and gas drilling and exploration as API 6A Specs. All the PME choke valves features easy operation by stable flow control.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

High Pressure Oil Base Mud Hoses API 7K Grade E 3-1-2 Inch 4 Inch Hammer Union FIG 1002 Safety Clamps

API 7K Grade E specify the rotary drilling and vibration hoses, mud delivery hoses and cement hoses as high pressure oilfield hoses during oil and gas drilling and exploration application.

 

The Grade E high pressure hoses works as flexible rubber connections of standpipe on the drilling rig and top drive or pump for pumping the mud.

 

PME Grade E oil base mud hoses are fabricated in Inside Diameter (ID) 3" (76 mm), 3-1/2" (89 mm), 4" (102 mm) and 5" (127 mm) at working pressure 7500 Psi, that is 517 bar.

 

Flexible Cementing Hose , Application: Cementing & Acidizing , ID: 2” , Length:15 ft , Working Pressure: 15000 psi , Test Press: 22500psi ,  Operating Temperature: -25~100°c , Wing: 2” Weco F×M Hammer Union FIG 1502 , standard : API SPEC 16C , lining : resist abrasion , corrosion , oil &  H2S , cover: fire resistant & stainless steel armored , handling device :  safety clamp &lifting collar & both ends

Vibrator Hose Assy 3-1/2 in x 20ft : Rating 5000psi, Size 3-1/2 in x 20ft, Vibrator Assy Vibrator Hose Assy 3.1/2” ID X 20ft Length : WP: 5000psi, TP : 10.000 Psi C/W: 1 Set Union Coupling 4” X 6000 Psi, Fig-602 & Safety Clamp And Hydrostatic Test Certificate

Flexible Metal Hose Material Stainless Steel, Rating 5000 psi, Connection Coupling API 7 K Flexible Hose With Hammer Union FIGURE 602, 5m length , 4" working pressure 4000 psi . 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

 

Fixed swivel flange 2in 2.5in 4in SS CS 150 class ferrule

 PME produce the smooth and serrated hose tail by fixed and swivel loose flange connection. The flange hose couplings are to connect the hydraulic rubber hoses.

 

PME flanged fittings are the hydraulic hose couplings with the flanges. Material carbon steel and stainless steel are material for the industrial flanges fittings.

 

PME Industrial flange couplings hose tail are categorized with #150 flanges with fixed hose tail and flange with swivel hose tail.

 

Fixed Flanges with Tail and collar

Swivel Flanges with Tail and collar

Hydraulic Hose End Ferrules

ID: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4", 5", 6" and 8"

Material: Carbon Steel, Stainless Steel 304, Stainless Steel 316

Flange Rated Pressure: ASTM 150 LBS

 

150# RF SS Fixed Flange Coupling Hose End with Tail and Collar

 

150# RF SS Swivel (Flexible) Flange Coupling Hose End with Tail and Collar

 

Ferrules for the Assembly of Hydraulic Hoses

 

For the nominal size, coupling tail length, hydraulic hose in mm, material hose shank, and flanges material of PME fixed and flexible flange coupling, contact PME sales team. Our sales RP will assist you the offer and technical support of hydraulic hose fitting.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com