What is the pressure rating of the vibrator hose with flangs end Grade E as API 7K specification

API 7K Grade E, Rotary Vibrator Hose, 3" ID x 6 meter, 12 meter Over Length Features:

 

End A: API Flange 4-1/16" WP 5000 Psi

End B: API Flange 4-1/16" WP 5000 Psi

External Armored Protection: No, but Stainless Steel Armor Cover for Option

Maximum Working Pressure: 7500 Psi

Test Pressure: 11250 Psi

Standards: API Spec 7K 6th Edition

Hoses come with Hydrostatic Pressure Test Certification and Pressure Chart Recorder

Material Certificate for Flanged Ends, NDT Inspection Reports and Quality Certificate

 

PME Grade E hoses are provided with safety clamps & Slings from both sides and full set of quality certificate for each hoses with unique serial number for good tracking.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com 

FMC Chiksan 1502 Iron Product Line Block Elbow and Long sweep 90 Degree Elbow 2" Figure 1502 Male Female Difference

 What's the difference between the block elbow 2" FIG1502 and long sweep 90 Degree elbow?

 

The two elbows can be in same union ends like 2" FIG1502 MxF, 2" FIG1502 MxM, 2" FIG1502 FxF. These hammer unions ends are available for the well service equipment with the inlet or outlet sharing the same union Figure. If the connections don't match, PME also offer the solution by crossover for various size, figure for hammer union and the API flanges.

 

Longsweep 90 Deg. elbow is widely used in fracking and flowback application. PME supply 2" and 3" for clients purchase, other sizes are also available. The Figure 1502 connection with male and female ends are interchangeable with most well know brand like FMC Chiksan and WECO.

 

Flow iron block elbow is also well known as cushion type elbow or target type. It's in CWP 15000 Psi for acid and fracturing, well testing and flowback service. The standard is API 16C. PME block elbow 2" FIG1502 MxF H2S sour gas service meet NACE-01-75.

 

Block Elbow, 2" FIG1502 MxF

90 Deg Elbow, 2" FIG1502 MxF

Flange Union, 2-1/16" x 2" FIG1502 F

Pup Joint SCH80, 2" FIG1502 MxF, 500mm

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

BOP Hydraulic Hose Fire Resistant Red Cover API 16D NPT Male JIC Fittings

PME 35MPa Hydraulic fire resistant hoses are designed and assembled as API 16D as blowout preventer control hoses.

The BOP hoses can be used in Blow-out Preventer System and the application at risk of fire for well control equipment in petroleum industry from 1/4" to 2", pressure rated 3000 Psi and 5000 Psi for options.

 

PME high pressure fire-resistant hoses are inspected by third party by inspection equipment like electrical pressure test pump and fire testing furnace.

 

The inspection is carried on the basis of API 16D Specifications for control systems for drilling well control equipment and control systems for diverter equipment.

 

The objective of fire resistance test confirms the API 16D Clause 10.1.2. The fire resistance report includes pressure curve, temperature curve, photos of fire resistance test and the related equipment.

 

BOP Hydraulic Hose, Fire Resistant, Red Cover

Size: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"

Working Pressure: 3000 Psi, 5000 Psi Pressure Rating

Connection: NPT Male, Hammer Unions MxF, JIC quick coupling, etc.

Max. Length: 100 meters

Hose Body Color: Red for easy identification

 

For more infos about PME flexible fire resistant hose assemblies according API 16D, PME is here for you 24 hours a day, 7 days a week!

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

 

Adjustable Choke Valve with 2 Inch Angle Flanges Rated Working Pressure 2500 LB Sour Service

 Hammer unions ends are usually as the valves connection for the adjustable choke. These choke valves are used to control the production rate by connecting with the drilling rig equipment which are in hammer unions ends too.

 

PME can design and produce the adjustable choke valve with angle flanged, that is, API flanges. PME angle type manual choke valves features in angle. Take the choke valve photo for example, the valves are sized in 2", and working pressure up to 2500 LB.

 

PME angle flanged choke valve are fabricated with main component like valve body, choke valve bonnet, valve seat, O-ring seal, hand wheel, etc. As major valves for choke manifold and wellhead Christmas trees, PME adjustable choke can serve for standard service an H2S sour gas service.

 

Besides of angle flange choke valve, we also supply high pressure needle choke valve and positive choke for oil and gas drilling and exploration as API 6A Specs. All the PME choke valves features easy operation by stable flow control.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

High Pressure Oil Base Mud Hoses API 7K Grade E 3-1-2 Inch 4 Inch Hammer Union FIG 1002 Safety Clamps

API 7K Grade E specify the rotary drilling and vibration hoses, mud delivery hoses and cement hoses as high pressure oilfield hoses during oil and gas drilling and exploration application.

 

The Grade E high pressure hoses works as flexible rubber connections of standpipe on the drilling rig and top drive or pump for pumping the mud.

 

PME Grade E oil base mud hoses are fabricated in Inside Diameter (ID) 3" (76 mm), 3-1/2" (89 mm), 4" (102 mm) and 5" (127 mm) at working pressure 7500 Psi, that is 517 bar.

 

Flexible Cementing Hose , Application: Cementing & Acidizing , ID: 2” , Length:15 ft , Working Pressure: 15000 psi , Test Press: 22500psi ,  Operating Temperature: -25~100°c , Wing: 2” Weco F×M Hammer Union FIG 1502 , standard : API SPEC 16C , lining : resist abrasion , corrosion , oil &  H2S , cover: fire resistant & stainless steel armored , handling device :  safety clamp &lifting collar & both ends

Vibrator Hose Assy 3-1/2 in x 20ft : Rating 5000psi, Size 3-1/2 in x 20ft, Vibrator Assy Vibrator Hose Assy 3.1/2” ID X 20ft Length : WP: 5000psi, TP : 10.000 Psi C/W: 1 Set Union Coupling 4” X 6000 Psi, Fig-602 & Safety Clamp And Hydrostatic Test Certificate

Flexible Metal Hose Material Stainless Steel, Rating 5000 psi, Connection Coupling API 7 K Flexible Hose With Hammer Union FIGURE 602, 5m length , 4" working pressure 4000 psi . 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

 

Fixed swivel flange 2in 2.5in 4in SS CS 150 class ferrule

 PME produce the smooth and serrated hose tail by fixed and swivel loose flange connection. The flange hose couplings are to connect the hydraulic rubber hoses.

 

PME flanged fittings are the hydraulic hose couplings with the flanges. Material carbon steel and stainless steel are material for the industrial flanges fittings.

 

PME Industrial flange couplings hose tail are categorized with #150 flanges with fixed hose tail and flange with swivel hose tail.

 

Fixed Flanges with Tail and collar

Swivel Flanges with Tail and collar

Hydraulic Hose End Ferrules

ID: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4", 5", 6" and 8"

Material: Carbon Steel, Stainless Steel 304, Stainless Steel 316

Flange Rated Pressure: ASTM 150 LBS

 

150# RF SS Fixed Flange Coupling Hose End with Tail and Collar

 

150# RF SS Swivel (Flexible) Flange Coupling Hose End with Tail and Collar

 

Ferrules for the Assembly of Hydraulic Hoses

 

For the nominal size, coupling tail length, hydraulic hose in mm, material hose shank, and flanges material of PME fixed and flexible flange coupling, contact PME sales team. Our sales RP will assist you the offer and technical support of hydraulic hose fitting.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

choke kill hose id 3 inch sour service 10 k fig 1502 m x f 120 feet 80 f...

Flexible hose 3 1/16" 15K Length required for the said flexible hose and end connections: 30ft, BX154 15K

KILL & CHOKE Hose - 2” ID 5Kpsi, API Spec 16C, ID: 2”, Length: 32ft, 

End 1s: 2” 10Kpsi Fig 1002 Butt Weld Male Sub & Nut

End 2: 2” 10Kpsi Fig 1002 Butt Weld Male Sub & Nut 

Suitable for H2S Service, Hose metallic parts NACE MR 0175 latest edition, 

Design pressure: 5,000psi, Working pressure: 5,000psi, Test pressure: 10,000psi,

Standard: API Spec 16C. 

Temperature class: B (-20º C to +100º C).

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Flexible Steel Choke Kill Hose Well Test Line 3 Inch 120 FT CWP 10K SS Armored Sour Gas Service

PME choke and kill hoses line is widely recommended as flexible connection between the riser and manifold during the oil and gas exploration. It's also named cofleixp hoses with inside diameter, pressure rating, total length and connection, ie: 4 1/16” (BX 155), Long 80 ft, Pressure: 15000 psi

 

The connection of PME coflex choke and kill hoses are hammer union (butt - welded or integral) FIG 1002 MxF, FIG 1502 MxF, API flanges (2-9/16", 3-1/8", 4-1/16") or customized coupling as clients' request.

 

The choke and kill hoses PME design and assemble as China quality API 16C hoses come with 2 x Safety Clamps, 2 x Lifting Collars Double Eyed 2 x Safety Chains c/w Shackles Each End. The coflex hoses lifting eyes are available for flowline products and oilfield services.

 

Pressure rating of PME choke and kill hoses can be up to 15000 Psi for the standard service and 10000 Psi for sour gas service as API 16C specification approved. And the hoses ends connections are good for H2S Sour Gas Service.

 

Inside diameter of colfex style choke kill hose ranges 2", 3", 3.5", 4" and 5". For low pressure rating like 5000 Psi, the thread can work as the hoses coupling. Stainless steel armor are wrapped outside of the hoses as fire protection.

 

Choke Kill Hose, H2S Service, 3" FIG1502 MxF, WP 10K, 60FT, 80FT, 120 FT

For other product lines of PME Choke and Kill Hose Line as listed technical details, call PME Team +86-13818990736 or Email contact@pmeindustrial.com. You'll get the fast delivery time and profession service for your drilling application!

 

COFLEXIP HOSES, SIZE: 4 1/16” (BX 155), LONG: 80 FT, PRESSURE: 10000 PSI

 

COFLEX HOSE (CHOKE AND KILL LINES) 2” X 50FT COME WITH BOTH END HAMMER UNION FIG 1502 W/P 10000PSI

 

COFLEX HOSE 2IN X 10000PSI X 50FT - WITH END TO END HAMMER UNION M X F 2IN FIG 1502

 

COFLEX HOSE, 2” X 50FT COME WITH BOTH END HAMMER UNION FIG 1502 W/P 10000PSI,

 

FLEXIBLE STEEL CHOKE HOSE, HOSE ID: 4 INCH, WP: 5000 PSI, TP: 7500 PSI, JOINT THREAD CONN.: UNION 4”-10000 PSI FIG, 102 BOTH END C/W SAFETY CLAMP, LENGTH: 10 METER

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

Get a Quote for Stainless Steel Camlock Couplings Type C Type D Type D

 

Camlock couplings are used for quick to secure the hose connection with available size from 1/2" to 8".

 

There are three materials for PME coupling, aluminum camlock fittings, stainless steel camlock fittings and brass camlock fittings.

 

The camlock coupling photo below is PME Camlock Coupling in SS316. Camlock coupling type C stands for female coupler with hose shank, type D for female coupler with female thread and type E for male coupler with hose shank.

 

Type A, Type B, Type C, Type D, Type E, Type F, Type DC, Type DP are the options for sales to suit for the application of PVC suction hose, rubber suction hoses and milling hoses for the delivery of water, petroleum & fuels and slurry.

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com

15K High Pressure Coflexip Hose 3-1/16" API 6A SS Armored 3 Inch ID Choke Kill Line for Sale

PME Choke and Kill Hose Line

Manufacturer: PME Industrial

Location: China

Description: Coflex Hose, Choke and Kill Line

Size: 3-1/16" x length as clients' required (20FT, 50FT, 100FT)

Working Pressure: 15000 Psi

With 3-1/16" API 6A Flanges on Both Hoses Ends

Fire Resistance: Yes

Stainless Steel Armor Covered: Yes

Hydrostatic Test Certificates and Coflex Hose Specification Available

 

The choke kill hose lines are manufactured as per API 16C Specification. Hose body and coflex hose couplings union ends or flanges are suitable for both standard and H2S service, meeting NACE MR0175.   

 

As extra high pressure choke and kill hose, PME coflex hoses function for oil production and completion application.

 

Please call PME Sales Team +8613818990736 (WhatsApp, 7/24) or Email contact@pmeindustrial.com for further information regarding the flow control equipments for the high pressure flexible rubber hoses or hard iron flowlines.

Shipping PME Chiksan Flowline Fittings 2in FIG1502 Sour Gas Service and Suction Discharge Hose by 40 HQ FCL

 

Labor Day Holiday start from May 1, and resume on May 6. PME sales team is available to answer clients' RFQ about High Pressure Drilling Hoses and Chiksan Flowline Iron Fittings, technical parameters and purchase orders during the holiday.

 

Please Email: contact@pmeindustrial.com or WhatsApp: +86-13808990736 for instant support.

 

For the last PME shipment in April, we handover the packages of hoses and flowline fittings and load the packages into 40 HQ container. The below photos of low pressure hoses and flow back irons are partial of this batch shipment. Happy Labor Day and Wish we all have a fruitful month in May.  

 

Cushion Elbow, 3" FIG1502 MxF

Target Tee, 3" FIG1502 MxFxF, FxMxF

Plug Valve, 2" FIG1502 MxF

Test Plug Male Cap 4" FIG206, C/W 1/2" NPT

Adjustable Choke Valve, 2" FIG1502 MxF

Oil Suction and Discharge Hose

4", WP 300 Psi, 3 Meters

What is the difference of Grade A, Grade B, Grade C, Grade D, Grade E and Grade F API 7K High Pressure Hoses

 

The high pressure hoses show PME Grade E Rotary Vibrator Hoses with integral hammer lug unions at both ends, male sub and wing nut at one ends and female sub at the other end. The over length of hose assembly is 50 feet.

 

According to API Spec 7K Drilling and Well Servicing Equipment, high pressure hoses assembly are identified by grades as the table 10.

 

Grade A, Grade B, Grade C, Grade D, Grade E and Grade F are classified by rated working pressure. It's also identical to the design pressure of PME high pressure drilling hoses.

 

API 7K Grade A PME Rotary Drilling Hoses rated working pressure 1500 Psi, test pressure 2250 psi, sized in 2", 2-1/2"

API 7K Grade B PME Vibrator Hoses rated working pressure 2000 Psi, test Pressure 3000 Psi, size in 2", 2-1/2"

API 7K Grade C PME Cement Hoses rated working pressure 4000 Psi, test Pressure 6000 Psi, size in 2", 3", 4" and 5"

API 7K Grade D PME Mud Delivery Hoses rated working pressure 5000 Psi, test Pressure 7500 Psi, size in 2" to 6"

API 7K Grade E PME High Pressure Drilling Hoses rated working pressure 10000 Psi, test Pressure 15000 Psi, size in 2-1/2" to 6"

API 7K Grade PME High Pressure Drilling Hoses rated working pressure 15000 Psi, test Pressure 22500 Psi with or without 2 sets of safety clamps which are not used as hoisting devices

 

Hydrostatic pressure test is performed on PME high pressure hoses assembly at the working pressure, which is 1.5 time of the working pressure. The test medium for hydrostatic pressure test is water.  

 

Email: contact@pmeindustrial.com or WhatsApp: +86-13808990736 for price quote of the high pressure drilling hoses, choke and kill hoses line, blowout preventer hoses and flowline flowback Chiksan Style Irons! 

Find Price for Chiksan Style Cementing Hose Loop with Swivel Joint Style 10 Style 50 2 Inch FIG1502 10 FT 105 MPa

High pressure Chiksan circulating and cementing hose loops are assembled by integral pup joints, long sweep swivel joint and hammer union ends.

 

PME Chiksan FIG 1502 cementing and circulating hose loops are manufactured as API 16C with swivel joint 2", 3", 4" in long sweep Style 10 and Style 50.

 

The hose loops serve for cementing, acid fracturing, well testing lines up to working pressure 42 MPa, 70MPa, and 105 MPa.

 

The union ends in FIG602, FIG1002 and FIG1502 in the cementing and circulating hose are good for fast make up and quick break out.

 

PME Cementing and circulating hoses are designed and manufactured for standard service and sour gas service NACE MR-01-75 as API 16C Specification.

 

Extended length of the PME hose loop are in 9.5 feet, 10 feet and 12 feet. Normally the swivel joint required by PME customers are in style 10 and style 50. But other swivel joint style 20, style 30, style 40, style 80, style 70 and style 100 are optional as long radius swivel joint for PME Industrial cementing and circulating hose.

 

Cementing Hose Loop 2" x 10 FT, WP 15000 Psi

C/W Swivel Joint 2" FIG1502 Style 50/10

 

Swivel Joint 2" FIG1502 Style 50, WP 15K

 

Contact PME Sales Team today for hose loop and swivel joint HS Code, cementing and circulating specs in PDF, by Email contact@pmeindustrial.com or call directly +86 138 1899 0736

 

 

PME Sales Team

Tel: +86 21 5837 2350

Cell/WhatsApp: +86 138 1899 0736

Email: contact@pmeindustrial.com

Site: www.pmeindustrial.com